Rear View Monitors/Cams

There are 147 products

  • Sort By

Car Color Video Backup Camera Night Vision Reversing License Plate Description: 135visible range. 7 infrared night vision LED. IP68-compliant dustproof and waterproof. High resolution color CMOS image sensor. Perfectly solve the issue of bad car rear view effect. The car rear view camera provides 135 visible range. Specification: Image device: Color CMOS Effective pixels: 628 X 586 Resolution: 420 TV lines Lens Angle: 135 degree Power supply: DC 12V Installation: Connect the black power input connector to power output device. Connect the yellow video output connector to terminal display device. Mount the camera at the back of the car(on the license plate,or other suitable place). Package Included: 1 X Car Rear View Camera 1 X Power Cable 1 X RCA Video Cable(5M)

$12.69

In stock

Description: 7 infrared night vision LED. Weatherproof/Waterproof,can be used both in car and home. Specification: Model:518T Image Device:PC1030D TV System:PAL/NTSC Effective Pixels:648 x 488 pixels Sensing Area:5.55um x 5.55um Scanning System:2:1Interlace Sync. System:Internal Resolution:420TV lines Horizontal Sync. Frequency:15.625KHz/15.734KHz Vertical Sync. Frequency:50Hz/60Hz Minimum Illumination:1.5Lux/F1.2 Video Output:1.0vp-p,75Ohm Gamma Consumption:0.45 AGC:Auto S/N Ratio:Better than 48dB White Balance:Auto Electronic Shutter:1/60~1/15,000 Seconds Balance:Auto Current Consumption:100mA Power Supply:DC12V Operating Temperature:-10C~46C RH95% MAX Storage Temperature:-30C~60C,RH95% MAX Length:13.5cm Width:8.5cm Height:8cm Package Included: 1 X Car Rear View Camera 1 X Power Supply Cable 1 X Video Cable 2 X Screw

$19.99

In stock

Description: 360 degree wide angle car reverse backup camera. Mini portable design,can be used both in car and home. Specification: Image sensor: CMOS Image Device: PC1030D TV System: PAL Effective Pixels: 648 x 488 pixels Sensing Area: 5.55um x 5.55um Scanning System: 2:1Interlace Sync. System: Internal Resolution: 420TV lines Horizontal Sync. Frequency: 15.625KHz/15.734KHz Vertical Sync. Frequency : 50Hz/60Hz Minimum Illumination: 1.5Lux/F1.2 Video Output: 1.0vp-p,75Ohm Gamma Consumption: 0.45 AGC: Auto S/N Ratio: Better than 48dB White Balance: Auto Electronic Shutter: 1/60~1/15,000 Seconds BLC: Auto Current Consumption: 100mA Power Supply: DC12V Operating Temperature: -10C~46C RH95% MAX Storage Temperature: -30C~60C,RH95% MAX Length: 13.5cm Width: 8.5cm Height: 8cm Package Included: 1 X Car Rear View CameraPAL 1 X Power Supply Cable 1 X Video Cable

$20.12

In stock

Description: High definition car reverse backup camera. Wide viewing angle. Compact design and easy to install. Applicable to variety of Vehicles:car,truck,RV,mini-van etc. Specification: Model:718T Image Device:PC1030D TV System:PAL/NTSC Effective Pixels:648 x 488 pixels Sensing Area:5.55um x 5.55um Scanning System:2:1Interlace Sync. System:Internal Resolution:420TV lines Horizontal Sync. Frequency:15.625KHz/15.734KHz Vertical Sync. Frequency: 50Hz/60Hz Minimum Illumination: 1.5Lux/F1.2 Video Output:1.0vp-p,75Ohm Gamma Consumption:0.45 AGC:Auto S/N Ratio:Better than 48dB White Balance:Auto Electronic Shutter:1/60~1/15,000 Seconds BLC:Auto Current Consumption:100mA Power Supply:DC12V Operating Temperature:-10C~46C RH95% MAX Storage Temperature: -30C~60C,RH95% MAX Length:13.5cm Width:8.5cm Height:8cm Package Included: 1 X Car Rear View Camera 1 X Power Supply Cable 1 X Video Cable

$14.09

In stock

Description: High definition,can help avoid incidents and accidents abrasion effectively. Waterproof. IR LED night vision function. Wide viewing angle. Easy to install. Applicable to variety of Vehicles:car,truck,RV,mini-van etc. Specification: Model: 728T Image Device: PC1030D TV System: PAL/NTSC Effective Pixels: 648 x 488 pixels Sensing Area: 5.55um x 5.55um Scanning System: 2:1Interlace Sync. System: Internal Resolution: 420TV lines Horizontal Sync. Frequency: 15.625KHz / 15.734KHz Vertical Sync. Frequency : 50Hz / 60Hz Minimum Illumination: 1.5Lux/F1.2 Video Output: 1.0vp-p, 75Ohm Gamma Consumption: 0.45 AGC: Auto S/N Ratio: Better than 48dB White Balance: Auto Electronic Shutter: 1/60~1/15,000 Seconds BLC: Auto Current Consumption: 100mA Power Supply: DC12V Operating Temperature: -10C~46C RH95% MAX Storage Temperature: -30C~60C,RH95% MAX Size: 13.5*8.5*8(L*W*H) Package Included: 1 X 650L Reverse Camera 1 X Power Supply Cable 1 X Video Cable

$15.99

In stock

Description: 1.Anti fog glass 2.CMOS imaging sensor 3.Support NTSC video system 4.Embedded mounting in rear bumper 5.Snap-in design, it is easy to install 6.High sensitivity and low power consumption 7.High-definition and 170 degree wide viewing angle 8.Water-proof, shock-proof and anti-jamming functions 9.Applicable to variety of vehicles: car, truck, RV, etc. 10.It helps to avoid incidents and accidents abrasion well 11.Extra-low illumination of 0.5 Lux for clear night vision 12.Its simple and modest design and small size won't draw any attention 13.This camera can give you a full sight of the back of your car when you are driving. 14.Low illumination level, it can work within 3 meters at night and other dark environments 15.To protect your car from collision with invisible obstacle, choose a high definition and good quality camera as ours 16.Perfect solution to get rid of that poor rear view visibility onyour car, boat, trailer, camper, truck or any vehicle that has no rear-view mirror or poor rear vision 17.Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted inside will fit into most vehicle key holes, no other installation needed Specification: Lens: 2.0cm Color: Black TV System: NTSC S/N Ratio: >48dB Net Weight: 134g Water-proof: IP66 Power: DC 12V10% White Balance: Auto Sync. System: Internal Video Cable Length: 6.0m Video Output: 1.0Vpp, 75Ohm Length Angle: 120~170 degree Cable Length of Camera: 56cm Scanning System: 2:1 Interlace Power Supply Cable Length: 41cm Image Reverse: Left-right mirror High grade of waterproofing: IP66 Horizontal Resolution: 420 TV lines Camera Size: 3.5(W) x 2.5(H) x 3.2(L)cm Effective Pixels: NTSC: 510(H) * 492(V) Current Consumption: No More Than 300mA Image Sensor: CMOS 1/4 MT9V125 or PC1030, color Minimum Illumination: 0.2 Lux/ F1.8(0 Lux with LED) Storage Temperature: -30 to + 60C, 95% RH maximum Operating Temperature: -20 to + 60C, 95% RH maximum Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds Installation: 1.Mount the camera inside the keyhole of your vehicle 2.Adjust the lens of the camera to its best position 3.Connect power cord to connect to your vehivle DC 12V power system 4.Connect the video output(yellow) of the camera to the display in your vehicle Package Included: 1 x Video Cable 1 x Power Cable 1 x User manual 1 x Car Rear View Camera 2 x Screws(For Bracket Mount)

$14.89

In stock

4.3 Inch LCD Car Rearview Monitor with LED Backlight for Camera DVD Description: 1. 4.3 inch LED Backlight Color TFT LCD monitor. 2. High-resolution picture. 3. Full color LED backlight display. 4. With 2 video input: White video cable connects to car rearview camera, yellow one to othervideo equipment. 5. Parking rearview priority: The monitor will start up automatically, and synchronously display the video from rearview camera when you're backing your car; the monitor will close itself after backing. Scenes will cut to rearview camera automatically while you're backing the car and change back to the original scenes after that. 6. Supports Car DVD, VCD, camera, STB, satellite receiver, and other video equipment. 7. Screen rotatable. 8. With menu buttons, Brightness/contrast/hue/saturation/language (Chinese/English/Spanish) adjustable. 9. Easy to install. 10. Low power consumption. 11. No Audio input or output. Specification: Item Type Car Monitors Screen size 4.3 inch Aspect Ratio 4:3 Power Supply DC 12V Color Black Item Size 127*88*36MM Model Name 403B Resolution 272x480 Package Included: 1 X 4.3" Car Monitor 1 X Power Cable 1 X Holder 1 X Video Cable Picture details:

$15.99

In stock

Description: 7" Color TFT LCD Car Rearview Monitor with 2 video input, works perfectly with car rearview cameras, supports Car DVD/serveillance camera/STB/satellite receiver/other video equipment. The monitor will start up automatically, and synchronously display the video from rearview camera when you're backing your car; the monitor will close itself after backing. Scenes will cut to rearview camera automatically while you're backing the car and change back to the original scene after that. Features: 1. High-resolution picture. 2. Full color LED backlight display. 3. With 2 AV input. 4. AV1 connects to car DVD, VCR and other video equipment. 5. AV2 to car backup camera. 6. Screen rotatable. 7. Screen ratio 16:9 adjustable. 8. Brightness/contrast/color adjustable. 9. 2 ways to install: standing or mounting. Specification: Item Type Car Monitors Display Size 7 inch Power 12 V 500 mA Item Size 175*118*23MM Resolution 480x240 Package Include: 1 X 7" Car Monitor 1 X Holder 1 X Bracket 1 X Video & Power Cable 1 X Remote Controller Picture details:

$29.99

In stock

Description: Waterproof. Easy to install. Wide viewing angle. LED night vision function. Low power consumption. Applicable to variety of Vehicles:car,truck,RV,mini-van etc. High resolution,high sensitivity and high signal to noise ratio. High definition,can help avoid incidents and accidents abrasion effectively. Shockproof,waterproof,anti-interference and resistance to high/low temperature. Perfect solution to get rid of that poor rear view visibility on your car,boat, trailer,camper,truck or any vehicle that no Rear-view mirror or poor rear vision. Specification: Sensor:PC1030 Water-proof:IP67 Sync system:Internal Lens angle:1.8mm/170 Resolution(TV lines):420 Video output:1.0Vp-p,75Ohm Scanning system:2:1 interlace Power supply: DC 12V Sensor area:4.08mm*3.12mm Storage temperature:-40C to 85C(RH 95% Max) Operating temperature:-20C to 75C(RH 95% Max) Minimum illumination:0.1-0.5 Lux/F=1.2(0 Lux with IR on) Note: 1.This product is a 12V voltage. 2.Removal of connector,terminal type,do not pull harness. 3.When installing the product,be sure to use the specified drill,screws,etc. 4.The camera should be professionally qualified technical staff,in suitable the environment installation. 5.To avoid damage to the camera function,the use must be approached carefully,do not have a strong impact or improper repair and reconstruction. Package Included: 1 X Car Reverse Camera

$15.99

In stock

Description: Waterproof. Easy to install. Wide viewing angle. LED night vision function. Low power consumption. Applicable to variety of Vehicles:car,truck,RV,mini-van etc. High definition,can help avoid incidents and accidents abrasion effectively. Perfect solution to get rid of that poor rear view visibility on your car,boat,trailer, camper,truck or any vehicle that no Rear-view mirror or poor rear vision. Specification: Sensor:PC1030 Water-proof:IP67 Sync system:Internal Lens angle:1.8mm/170 Resolution(TV lines):420 S/N radio:More than 48db Video output:1.0Vp-p,75Ohm Scanning system:2:1 interlace Power supply: DC 12V +/- 10% Sensor area:5.961mm*4.276mm Current Consumption:No more 300mA Storage temperature:-30C to 60C(RH 95% Max) Operation temperature:-20C to 60C(RH 95% Max) Other items:Auto matic white balance,Agc and BLG Minimum illumination:0.2 Lux/F1.8(0 Lux with LED) Package Included: 1 X Car Reverse Camera

$13.49

In stock

Description: Waterproof. Easy to install. Wide viewing angle. LED night vision function. Low power consumption. Applicable to variety of Vehicles:car,truck,RV,mini-van etc. High resolution,high sensitivity and high signal to noise ratio. High definition,can help avoid incidents and accidents abrasion effectively. Shockproof,waterproof,anti-interference and resistance to high/low temperature. Perfect solution to get rid of that poor rear view visibility on your car,boat,trailer, camper,truck or any vehicle that no rear-view mirror or poor rear vision. Specification: Sensor:PC1030 Water-proof:IP67 Sync system:Internal Lens angle:1.8mm/170 Resolution(TV lines):420 Video output:1.0Vp-p,75Ohm Scanning system:2:1 interlace Power supply: DC 12V Sensor area:4.08mm*3.12mm Storage temperature:-40C to 85C(RH 95% Max) Operating temperature:-20C to 75C(RH 95% Max) Minimum illumination:0.1-0.5 Lux/F=1.2(0 Lux with IR on) Note: 1.This product is a 12V voltage. 2.Removal of connector,terminal type,do not pull harness. 3.When installing the product,be sure to use the specified drill,screws,etc. 4.The camera should be professionally qualified technical staff,in suitable the environment installation. 5.To avoid damage to the camera function,the use must be approached carefully, do not have a strong impact or improper repair and reconstruction. Package Included: 1 X Car Reverse Camera

$13.99

In stock

Description: Waterproof. Easy to install. Wide viewing angle. LED night vision function. Low power consumption. Applicable to variety of Vehicles:car,truck,RV,mini-van etc. High resolution,high sensitivity and high signal to noise ratio. High definition,can help avoid incidents and accidents abrasion effectively. Shockproof,waterproof,anti-interference and resistance to high/low temperature. Perfect solution to get rid of that poor rear view visibility on your car,boat,trailer, camper,truck or any vehicle that no rear-view mirror or poor rear vision. Specification: Sensor:PC1030 Water-proof:IP67 Sync system:Internal Lens angle:1.8mm/170 Resolution(TV lines):420 Video output:1.0Vp-p,75Ohm Scanning system:2:1 interlace Power supply: DC 12V Sensor area:4.08mm*3.12mm Storage temperature:-40C to 85C(RH 95% Max) Operating temperature:-20C to 75C(RH 95% Max) Minimum illumination:0.1-0.5 Lux/F=1.2(0 Lux with IR on) Note: 1.This product is a 12V voltage. 2.Removal of connector,terminal type,do not pull harness. 3.When installing the product,be sure to use the specified drill,screws,etc. 4.The camera should be professionally qualified technical staff,in suitable the environment installation. 5.To avoid damage to the camera function,the use must be approached carefully, do not have a strong impact or improper repair and reconstruction. Package Included: 1 X Car Reverse Camera

$15.49

In stock

Description: Anti fog glass. CMOS imaging sensor. Support NTSC video system. Embedded mounting in rear bumper. Snap-in design, it is easy to install. High sensitivity and low power consumption. High-definition and 170 degree wide viewing angle. Water-proof, shock-proof and anti-jamming functions. It helps to avoid incidents and accidents abrasion well. Extra-low illumination of 0.5 Lux for clear night vision. Its simple and modest design and small size won't draw any attention. This camera can give you a full sight of the back of your car when you are driving. To protect your car from collision with invisible obstacle, choose a high definition and good quality camera as ours. Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper, truck or any vehicle that has no rear-view mirror or poor rear vision. Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted inside will fit into most vehicle key holes, no other installation needed. Specification: Lens: 2.0cm Color: Black TV system: NTSC S/N ratio: >48dB Net weight: 128g Water-proof: IP66 Power: DC 12V10% White balance: Auto Camera size: 22*21mm Sync. system: Internal Video cable length: 6.0m Video output: 1.0Vpp, 75Ohm Length angle: 120~170 degree Cable length of camera: 59cm Scanning system: 2:1 Interlace Power supply cable length: 41cm Image reverse: Left-right mirror High grade of waterproofing: IP66 Horizontal resolution: 420 TV lines Effective pixels: NTSC: 510(H) * 492(V) Current consumption: No More Than 300mA Image sensor: CMOS 1/4 MT9V125 or PC1030, color Minimum illumination: 0.2 Lux/ F1.8(0 Lux with LED) Storage temperature: -30 to + 60C, 95% RH maximum Operating temperature: -20 to + 60C, 95% RH maximum Electronic shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds Installation: 1.Mount the camera inside the keyhole of your vehicle. 2.Adjust the lens of the camera to its best position. 3.Connect power cord to connect to your vehicle DC 12V power system. 4.Connect the video output(yellow) of the camera to the display in your vehicle. Package Included: 1 X Video Cable 1 X Power Cable 1 X User manual 1 X Car Rear View Camera

$10.74

In stock

Description: Anti fog glass. CMOS imaging sensor. Support NTSC video system. Embedded mounting in rear bumper. Snap-in design, it is easy to install. High sensitivity and low power consumption. High-definition and 170 degree wide viewing angle. Water-proof, shock-proof and anti-jamming functions. Applicable to variety of vehicles: car, truck, RV, etc. It helps to avoid incidents and accidents abrasion well. Extra-low illumination of 0.5 Lux for clear night vision. Its simple and modest design and small size won't draw any attention. This camera can give you a full sight of the back of your car when you are driving. Low illumination level, it can work within 3 meters at night and other dark environments. To protect your car from collision with invisible obstacle, choose a high definition and good quality camera as ours. Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper, truck or any vehicle that has no rear-view mirror or poor rear vision. Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted inside will fit into most . Vehicle key holes, no other installation needed. Specification: Lens: 2.0cm Color: Black TV system: NTSC S/N ratio: >48dB Net weight: 133g Water-proof: IP66 Power: DC 12V10% White balance: Auto Sync. system: Internal Video cable length: 6.0m Video output: 1.0Vpp, 75Ohm Length angle: 120~170 degree Cable length of camera: 59cm Scanning system: 2:1 Interlace Power supply cable length: 42cm Image reverse: Left-right mirror High grade of waterproofing: IP66 Horizontal resolution: 420 TV lines Camera size: 4.0(W) x 2.5(H) x 2.1(L)cm Effective pixels: NTSC: 510(H) * 492(V) Current consumption: No more than 300mA Image sensor: CMOS 1/4 MT9V125 or PC1030, color Minimum illumination: 0.2 Lux/ F1.8(0 Lux with LED) Storage temperature: -30 to + 60C, 95% RH maximum Operating temperature: -20 to + 60C, 95% RH maximum Electronic shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds Installation: 1.Mount the camera inside the keyhole of your vehicle. 2.Adjust the lens of the camera to its best position. 3.Connect power cord to connect to your vehicle DC 12V power system. 4.Connect the video output(yellow) of the camera to the display in your vehicle. Package Included: 1 X Video Cable 1 X Power Cable 1 X User Manual 1 X Car Rear View Camera 2 X Screws(For Bracket Mount)

$10.99

In stock

Description: 1.Anti fog glass. 2.CMOS imaging sensor. 3.Support NTSC video system. 4.Embedded mounting in rear bumper. 5.Snap-in design, it is easy to install. 6.High sensitivity and low power consumption. 7.High-definition and 170 degree wide viewing angle. 8.Water-proof, shock-proof and anti-jamming functions. 9.Applicable to variety of vehicles: car, truck, RV, etc. 10.It helps to avoid incidents and accidents abrasion well. 11.Extra-low illumination of 0.5 Lux for clear night vision. 12.Its simple and modest design and small size won't draw any attention. 13.This camera can give you a full sight of the back of your car when you are driving. 14.Low illumination level, it can work within 3 meters at night and other dark environments. 15.To protect your car from collision with invisible obstacle, choose a high definition and good quality camera as ours. 16.Perfect solution to get rid of that poor rear view visibility onyour car, boat, trailer, camper, truck or any vehicle that has no rear-view mirror or poor rear vision. 17.Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted inside will fit into most vehicle key holes, no other installation needed. Specification: Lens: 2.0cm TV System: NTSC S/N Ratio: >48dB Net Weight: 172g Water-proof: IP66 Power: DC 12V10% White Balance: Auto Color: Black, Silver Sync. System: Internal Video Cable Length: 6.0m Length Angle: 120~170 degree Cable Length of Camera: 45cm Scanning System: 2:1 Interlace Power Supply Cable Length: 145cm Image Reverse: Left-right mirror High grade of waterproofing: IP66 Horizontal Resolution: 420 TV lines Camera Size: 2.9(W) x 2.0(H) x 3.3(L)cm Effective Pixels: NTSC: 510(H) * 492(V) Current Consumption: No More Than 300mA Video Output: RCA Connector, 1.0vP>P, 75Q Image Sensor: CMOS 1/4 MT9V125 or PC1030, color Minimum Illumination: 0.2 Lux/ F1.8(0 Lux with LED) Storage Temperature: -30 to + 60C, 95% RH maximum Operating Temperature: -20 to + 60C, 95% RH maximum Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds Installation: 1.Mount the camera inside the keyhole of your vehicle. 2.Adjust the lens of the camera to its best position. 3.Connect power cord to connect to your vehivle DC 12V power system. 4.Connect the video output(yellow) of the camera to the display in your vehicle. Package Included: 1 X Cable 1 X User Manual 1 X Car Rear View Camera

$9.99

In stock

Description: Stand security TFT monitor. Rear-view camera priority. Car vehicle security system. works perfectly with car rearview cameras. Swivel function for trucks,bus,trailer and so on. High-resolution picture and full color LED display. 5 inch security color TFT LCD car vehicle rearview monitor. Helps in preventing accidents while driving in reverse by avoiding children, traffic, pedestrians and pets while backing out of the driveway or parking space. Specification: Color Black Weight(Kg) 0.3 Size 12x7.5x1.2cm Screen Size 5 inch HD ditigal TFT LCD Resolution 480(W)*RGB*272(H) Color Display Yes - RGB Video System AUTO NTSC/PAL Voltage input DC 12V Working Temperature -20-50 Power Cable Length 150cm Package Included: 1 X Car Monitor Camera Picture details:

$36

In stock

Description: 1.Anti fog glass. 2.CMOS imaging sensor. 3.Support NTSC video system. 4.Embedded mounting in rear bumper. 5.Snap-in design, it is easy to install. 6.High sensitivity and low power consumption. 7.High-definition and 170 degree wide viewing angle. 8.Water-proof, shock-proof and anti-jamming functions. 9.It helps to avoid incidents and accidents abrasion well. 10.Extra-low illumination of 0.5 Lux for clear night vision. 11.Its simple and modest design and small size won't draw any attention. 12.This camera can give you a full sight of the back of your car when you are driving. 13.To protect your car from collision with invisible obstacle, choose a high definition and good quality camera as ours. 14.Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper, truck or any vehicle that has no rear-view mirror or poor rear vision. 15.Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted inside will fit into most vehicle key holes, no other installation needed. Specification: Lens: 2.0cm Color: Black TV System: NTSC S/N Ratio: >48dB Net Weight: 128g Water-proof: IP66 Power: DC 12V10% White Balance: Auto Camera Size: 22*21mm Sync. System: Internal Video Cable Length: 6.0m Video Output: 1.0Vpp, 75Ohm Length Angle: 120~170 degree Cable Length of Camera: 59cm Scanning System: 2:1 Interlace Power Supply Cable Length: 41cm Image Reverse: Left-right mirror High grade of waterproofing: IP66 Horizontal Resolution: 420 TV lines Effective Pixels: NTSC: 510(H) * 492(V) Current Consumption: No More Than 300mA Image Sensor: CMOS 1/4 MT9V125 or PC1030, color Minimum Illumination: 0.2 Lux/ F1.8(0 Lux with LED) Storage Temperature: -30 to + 60C, 95% RH maximum Operating Temperature: -20 to + 60C, 95% RH maximum Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds Installation: 1.Mount the camera inside the keyhole of your vehicle. 2.Adjust the lens of the camera to its best position. 3.Connect power cord to connect to your vehivle DC 12V power system. 4.Connect the video output(yellow) of the camera to the display in your vehicle. Package Included: 1 X Video Cable 1 X Power Cable 1 X User Manual 1 X Car Rear View Camera Similar Products: Click here

$10.49

In stock

HD Car Rear View Backup CCD Camera for Toyota 09 10 11 Camry Description: Color CCD,PAL/NTSC. Waterproof and night vision. Support NTSC video system. High definition and wide viewing angles. High sensitivity and low power consumption. To protect your car from collision with invisible obstacle. Its simple and modest design and small size won't draw any attention. They should be installed at proper position and used with car DVD player, monitor,GPS,parking sensor,etc. Specification: Power: 110mA Waterproof: IP67/IP68 TV system: PAL/NTSC Lens angle: 135/170 Power supply: 12V/24V Image sensor: Color CCD Horizontal resolution: 480TVL Consumption: Max 300mA with IR on Video output: RCA connector, 1.0vP>P,75Q Sensing area: 1/3: 4.9*3.7mm,1/4: 3.6*2.7mm Shutter speed: 1/50(PAL) 1/60(NTSC)- /10000 Effective pixels: 1/3:500*582 pixels,510*492 pixels; 1/4:512*582 pixels,512*492 pixels Operating temperature: -40 to 85 RH 95% Max Minimum illumination: 0.1Lux/F=1.2(0Lux with IR on) Fitment: Fit for Toyota 09 10 11 Camry Installation: 1.Mount the camera inside the keyhole of your vehicle. 2.Adjust the lens of the camera to its best position. 3.Connect power cord to connect to your vehicle DC 12V power system. 4.Connect the video output(yellow) of the camera to the display in your vehicle. Package Included: 1 X Video Cable 1 X Power Cable 1 X User Manual 1 X Car Rear View Camera

$12.99

In stock

Car HD Rear View Camera Night Vision Waterproof for BMW Description: Color CCD,PAL/NTSC. Waterproof and night vision. Support NTSC video system. Car rearview/reverse/backup camera. High definition and wide viewing angles. High sensitivity and low power consumption. To protect your car from collision with invisible obstacle. Its simple and modest design and small size won't draw any attention. They should be installed at proper position and used with car DVD player, monitor,GPS,parking sensor,etc. Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper, truck or any vehicle that has no rear-view mirror or poor rear vision. Specification: Power: 110mA Waterproof: IP67/IP68 TV system: PAL/NTSC Lens angle: 135/170 Power supply: 12V/24V Image sensor: Color CCD Horizontal resolution: 480TVL Consumption: Max 300mA with IR on Video output: RCA connector, 1.0vP>P,75Q Sensing area: 1/3: 4.9*3.7mm,1/4: 3.6*2.7mm Shutter speed: 1/50(PAL) 1/60(NTSC)- /10000 Effective pixels: 1/3:500*582 pixels,510*492 pixels; 1/4:512*582 pixels,512*492 pixels Operating temperature: -40 to 85 RH 95% Max Minimum illumination: 0.1Lux/F=1.2(0Lux with IR on) Fitment: Fit for BMW 3 Series 5 Series E39 Installation: 1.Mount the camera inside the keyhole of your vehicle. 2.Adjust the lens of the camera to its best position. 3.Connect power cord to connect to your vehicle DC 12V power system. 4.Connect the video output(yellow) of the camera to the display in your vehicle. Package Included: 1 X Video Cable 1 X Power Cable 1 X English User Manual 1 X Car Rear View Camera

$19.99

In stock

Car HD Rear View Wired Camera Night Vision Waterproof for Nissan Description: Color CCD,PAL/NTSC. Waterproof and night vision. Support NTSC video system. Car rearview/reverse/backup camera. High definition and wide viewing angles. High sensitivity and low power consumption. To protect your car from collision with invisible obstacle. Its simple and modest design and small size won't draw any attention. They should be installed at proper position and used with car DVD player,monitor,GPS,parking sensor,etc. Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper, truck or any vehicle that has no rear-view mirror or poor rear vision. Specification: Power: 110mA Waterproof: IP67/IP68 TV system: PAL/NTSC Lens angle: 135/170 Power supply: 12V/24V Image sensor: Color CCD Horizontal resolution: 480TVL Consumption: Max 300mA with IR on Video output: RCA connector, 1.0vP>P,75Q Sensing area: 1/3: 4.9*3.7mm,1/4: 3.6*2.7mm Shutter speed: 1/50(PAL) 1/60(NTSC)- /10000 Effective pixels: 1/3:500*582 pixels,510*492 pixels; 1/4:512*582 pixels,512*492 pixels Operating temperature: -40 to 85 RH 95% Max Minimum illumination: 0.1Lux/F=1.2(0Lux with IR on) Fitment: Fit for Nissan Qashqai 09 10 11 12 X-Trail Installation: 1.Mount the camera inside the keyhole of your vehicle. 2.Adjust the lens of the camera to its best position. 3.Connect power cord to connect to your vehicle DC 12V power system. 4.Connect the video output(yellow) of the camera to the display in your vehicle. Package Included: 1 X Video Cable 1 X Power Cable 1 X English User Manual 1 X Car Rear View Camera

$12.99

In stock

Folding 4.3 Inch TFT LCD Car Rear View Reverse Color Camera Feature: Screen size: 4.3 inch Aspect ratio: 16:9 Resolution: 480RGBx272 Video system: NTSC/PAL compatible Power supply: DC 12V Rated power: 3W Without menu button No audio input or output. Operating Temperature: -10~+50 Storage temperature:-20~+60 Supports car DVD, VCD, camera, and other video equipment With 2 video input port,white video cable connects to car rearview camera, the yellow one connects to DVD or VCD Parking rearview priority, the screen automatically switch to reversing image when reversing Package Included: 1 X 4.3 inch TFT LCD Car Monitor 1 X Power Cable 1 X English Manual

$27.48

In stock

Universal Adjustable Plug-In Car Camera Rear View Camera with Light Feature: TV lines:480 lines Size:15x10x5cm Model:JCS-606D View Wide Angle:170 degrees Camera Features:Night Vision Image Sensor:CMD chip OV7950 High-definition CCD camera 4 LED lights, night vision performance even more remarkable Package Included: 1 x Car Rear View Camera 1 x Power Cable 1 x Video Cable 1 x English Manual

$15.99

In stock

18.5 Punch 608p Car Reversing Camera HD Night Vision CCD Camera Description: 1.Easy to install. 2.Built-in reversing reference line. 3.Large angle waterproof lens 170 degrees. 4.0.1LUX illumination night vision, waterproof, shockproof. 5.Programs in high definition CCD reversing camera ASIC. Specification: Model CL1254 Camera Features Night Vision Image Sensor CCD chip ultra-clear View Wide Angle 170 degrees Image Sensor CCD Effective Pixels 800H * 480V 600TV lines Standard NTSC / PAL Power supply 120WA/12V Power 0.8W Waterproof grade IP67 Gain Control (AGC) Automatic SNR > = 48dB (AGCDEF Minimum illumination 0.1LUX Operating temperature and humidity -30 -85 Scan Mode: PAL 625Lines.60Field/sec, NTSC: 525Lines.60Field/sec Package Included: 1 X Car Rear View Camera 1 X 6m Video Extension Cable 1 X 1.5m DC Power Cable 1 X English Manual

$9.59

In stock

18 IR LEDS Truck Bus Rear View Monitor Backup Camera Night Vision Description: This tilt body style camera compatible with most rear view systems or car LCD screens that support camera or video RCA input. The cameral made out of high quality components, 120 degrees wide angle lens and very sharp color CCD chip. The body of the camera features weather proof, shock proof constriction with night vision infrared LEDs and light detection sensor. Feature: 1.Camera for rear view fixed on the car body with night vision 2.Reverse guide line for choice to help rear view parking more safely 3.Mirror image camera, high performance 4.Tilt bracket for rear view adjustment 5.Night vision with sensor 6.18 Night Vision IR LEDs 7.Have 5m wire. 8.Waterproof, shockproof, anti-interference Specification: TV Systems NTSC Image Sensors Color CMOS Total Pixels 512x492 View angle 120 degrees Min. Illumination 0.1 lux Resolution 420 TV Lines Lens 2.8mm Video Output 1.0vp-p composite video at 75ohm Power Supply DC 12V Operating Temperature (Deg. C) -50 C~ +50 C Package Included: 1 X Truck Bus Monitor Backup Camera 1 X 5m wire 1 X Manual

$19.49

In stock

Description: 170 degrees Wide Angle. High resolution, color restore true. Night vision effect is outstanding. Reversing video is fluent, quality is stable. Specification: Pickup device: MV136 1/4 COLOR CCD Signal System:NTSC/PAL optional Effective pixels:PAL:720*576 NTSC:720*480 Scanning system:2:1 interlaced scanning Definition:420TV lines Visual Angle:170 optional Vertical synchronization frequency:60Hz Minimum illumination:1Lux/F1.2 Video output:1.0vp-p, 75Ohm coefficient:0.45 AGC:Automatic SNR > 48dB White balance:Automatic Electronic shutter:1/60-1/20,000s Backlight compensation: Automatic Current consumption:120mA maximum Power supply:DC12V Operating temperature: -20C~70C maximum Humidity RH95% Storage temperature: -40C~80C maximum Humidity RH95% Package Included: 1 X Rear View Camera

$16.99

In stock

Specification: Image sensors: 1/4" color CCD TV System: NTSC default & PAL request Minimum illumination. <0.5 AGC: Auto BLC: Auto White Balance: Auto Video Color: Colorful Waterproof Class: ip 66 Effective Pixels : 580X540 Resolution : 420TV lines Video Output: 1.0Vp-p,75? Electronic Shutter: 1/60(NTSC)-1/10000S S/N ratio: Better Than 48db Lens Angle: 170 Operation Temperature: -20C+80C RH95% Storage Temperature: -30C+80C Working Power (DCV): 12V Current consumption: 90mA Max Note:This item doesn't including LCD Monitor,Only sold rear view camera. Description : No-DVD-Player or DVD-off Condition: when reversing, the monitor is automatically switched on to display real-time backup images. After reversing, it is automatically switched off. DVD-On Condition: When reversing, the monitor is automatically switched to display real-time backup images. After reversing, it is automatically switched back to display DVD video. Package Included: 1 X Car RearView Backup Camera

$13.99

In stock

CSX07T-HQ01 7 Inch Car Desktop Monitors LCD Simulate LED Screen Description: 1.Display Appearance Simple and generous 2.Simple and easy to operate with OSD menu remote control. 3.You can adjust the viewing angle of bracket what you want to. 4.Superman design, reversing automatic start, picking files off from work. 5.Remove the bracket, coupled with the frame can be used as a headrest monitor. 6.Display screen can be adjusted mirroring, scaling, and other functions by panel buttons. Specification: Video Input 2 AV Power input 12V Power 6W Resolution 480(H) X 234(V) Display Mode 16:9 / 4:3 switch Format PAL / NTSC automatic recognition Two-way AV input AV1 connection DVD, AV2 access camera, AV2 first(connect ACC) Package Included: 1 X 7 Inch Car Desktop Monitors Picture details:

$35.99

In stock

CSX43D-A2 4.3 Inch Car Monitor Folded LCD Digital Display Black Description: 1.simple and elegant display 2.AV1 connected DVD, AV2 access camera, AV2 first 3.Superman design, reversing automatic start, picking files off from work 4.The display can be easily folded closed when not in use, the use of a key to open the display Specification: Display Mode 16:9 widescreen Video Input 2 AV Power input 12V Power 3W Format PAL / NTSC automatic recognition Resolution 480 (H) * 272 (V) Note: Connect the power cord must distinguish between positive and negative (red + black -) If you pick the wrong, fuse box fuse immediately. Please replace the same parameters insurance. Package Included: 1 X 4.3 inch Car Monitor Folded 1 X Power Cable 1 X User Manual Picture details:

$22.39

In stock

Description : 1. Exquisite designed, portable and reliable; 2. High Resolution, and excellent color effect; 3. Compatible with both PAL and NTSC video system; 4. 2-Channel video input (V1 for DVD player/V2 for backup camera) automatically switch; 5. Supports Car DVD, VCD, camera, STB, satellite receiver, and other video equipment. 6. This listing is for drivers who do not have a reverse camera or a factory screen. 7. Simple plug and play, LCD monitor and camera can be quickly installed allowing you to have a reverse camera. 8. With menu buttons, Brightness/contrast/hue/saturation/language (Chinese/English/Spanish) adjustable. Specification : Screen Size 4.3 inch Display Size 4:3 Resolution 320 x 240 Color Model RGB Video System PAL/NTSC Power Supply DC 12V Power Consumption 2W Operation Temperature -20C~60C Unit Dimensions 127*88.5*36mm Package included : 1 x Rear View Monitor Details pictures :

$21.99

In stock

3.5" TFT LCD Color Screen Monitor for Car Rear Reverse Rearview Backup Camera Feature: Take three adjusting button, can adjust the brightness, contrast, etc After connecting reversing system, when the reverse images automatically turn to display Connect this LCD Monitor to your vehicle. For use with car camera's, rear view cameras, etc. Unit Size :10.8cm x 6.9cm / 4.25 x 2.75 inch Cable Length: 1.52m / 60 inch Color: Black Note: 1.Connect the power cord must distinguish is negative (red + black -) if the wrong, the insurance tube fuse immediately in the box. Please replace the same parameters of insurance 2.This product is the main components of the LCD screen, said is glass, please pay attention to crushing 3.Installation is strong and reliable, to prevent fall when running in the car or the brake, personal and equipment accident 4.Dc 12 v contact should take on the power supply line to prevent because of excessive voltage affect the normal use of the machine. 5.Non-professional person do not dismantle the machine. If fail, please turn off the power immediately Package Included: 1 X 3.5" TFT LCD Car Mirror Monitor 1 X Power Cable (1.52M) 1 X User Manual

$18.99

In stock

1 - 30 of 147 items