Electric Scooters

There are 56 products

  • Sort By

2x Plastic Motorcycle Changing Wheel Rim Protectors Cover Tool Workshop Specification: 100% Brand New Material: Plastic Color: Like the picture show Size:Like the picture show Cable Length: 32cm Features: Protect tire rims, durable Soft material, easy to use Designed to reduce damage the wheel rims when fitting or removing tyres Fitment: Fit for all motorcycle Package includes: 1 X Wheel Rim Protectors

$3.89

In stock

Description: Type 200*50 is fit for which is the same as it. Do your tyre usually pop?or leak air?breakage? This product is your best chioce.High quality rubber,not easy to leak air and good stability. 1. Tyre will indicate the size,choose according to tyre.But the inner tube will generally have a suitable range. 2. Gas nozzle type of inner tube of also need to cooperate with circle to select. Note: Separate to inflatable inner tube will be greater than cover tyre and will affect the normal life of inner tube. Inner tube is just a sealed air bag,and it cannot bear high pressure;The tire pressure by cover tyre. The size of the inner tube and tyre are matched. Specification: Name: 200x50Inner Tube Materal: Butyl rubber Size: 18 cm (diameter) 9 cm (Inside diameter) Width: 5cm Color:Black For electric Scooters Package Included: 1 X 200x50Inner Tube

$4.89

In stock

12V-80V 5W LED Waterproof Electric Bike Scooter Headlight Lamp Description: Versatility: 12V-80V electric cars Power: 5W can replace the ordinary 35W halogen lamps Life: more than 10,000 hours High Brightness: Brightness is 2-10 times the normal halogen Temperature control: control in 45 degrees Special protective equipment: anti-short-circuiting device Specifications: Material: ABS Light source: LED Power: 5W Flux:850lm Color Temperature:6000K-7500K Working temperature:-40~ +85 Input voltage: 12V-80V Size:As the picture show Wire connection: Wire style 1: Black/white wire connect to the ground Blue wire to power - Orange wire to ACC Red to power + Blue and Red to the alarm horn. Wire style 2: Black/white wire connect to the ground Blue wire to power - Orange wire to ACC Red to power + Package Included: 1 headlight

$19.99

In stock

Description: Suitable for small surf electric scooter etc Replacement drive belt 3M-420-12 Durable, easy to use Specification: Color: Black Material: Rubber Teeth Number: 140 Total belt length: 420mm(about 16.5'') Peak distance between two adjacent belt teeth: 3mm (about 0.11") Width Of Belt: 12mm (about 0.47") Using: 1.Check The numbers and letters on The Old Belt 2. If you can't find the numbers ane letters printed on belt a) Measure the length of the belts loop b) Measure the distance from peak to peak of two adjacent belt teeth c) Measure the width of the belt Belt length is the overall size of the belt's loop measured as if the belt were cut between two adjacent teeth and laid out on a flat surface Package Included: 1 X Drive Belt

$2

In stock

Description: Electric car booster inductor 5 magnet 85cm line 2.5mm magnet, standard five magnet disk Specification: Cable length: 850 mm Disk diameter: 65mm Magnet size: 2.5mm Number of magnets: 5PCS Instruction: SM terminals blue - signal, red - positive, yellow - negative Package Included: 1 X Disk 1 X Wiring

$2.99

In stock

Description: When it turn on, you could choose the songs you like to play With LED colorful light design Protective Safe Non-slip Pedal, Handlebar, Wheel Design With a small Storage box inside the scooter It must be a funny good toy gift for your baby Specification: Size: About 80cm x 54cm x 45cm (31.50inch x 21.26inch x 17.72inch) Color:White / Red / Green / Blue / Pink For age: 18 months -- 3 five years old (To play under the guide by a parent) Load-bearing: 30kgs Duration of use: About 1 hour Material: Firm Plastic Note: Under the cushion of the scooter, there is a line for charging, you need to connect it to be charged. After charging, you must to cut down the power line, then to turn on the scooter. Package Included: 1 X Child Scooter

$159.99

In stock

Specification: Hole Diameter: 22mm Handle length: 110mm Fitment: Motorized Bicycle Note: 1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need 2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm) 3.The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding 4.Instruction is not included Package Included: 1 X Billet Throttle 1 X Kill Switch 1 X Braided Cable

$8.99

In stock

Description: A3144 A3144E OH3144E Hall Effect Sensor Specifications: Limit parameter (25 ) Power supply voltage VCC:24V Output reverse breakdown voltage Vce: 50V Output low current IOL: 50mA Storage temperature range TS: -65 ~ 150 Operating temperature TA: E :-20 ~ 85 L:-40 ~ 150 Package Included: 5 X Hall TO-92UA Interrupteur

$1.99

In stock

10X Hall Sensor Brushless Motor A3144 A3144E OH3144E Capteur effet TO-92UA Interrupteur 3Pin SIP Description: High quality A3144 A3144E OH3144E Hall Effect Sensor Specifications: Limit parameter (25 ) Power supply voltage VCC 24V Output reverse breakdown voltage Vce 50V Output low current IOL 50mA Storage temperature range TS -65 ~ 150 Operating temperature TA : E :-20 ~ 85 L:-40 ~ 150 Package Included: 10 x Hall TO-92UA Interrupteur

$3.69

In stock

Specification: LED indicator Input voltage: AC 110 - 240V 50/60hz Output voltage: 36v DC Output current: 1.5 A Connector: 3 prongs Dimension: 155 x 88 x 53 mm Package Included: 1 X Charger

$11.99

In stock

Description: Power Supply: AC220V20% Power Supply Frequency: 50Hz5Hz Output: 48V 2.5A Notice: It will heat when used so it must keep in good ventilation. Keep it away from the Inflammable and the explosive. Don't put the charger on the sofa, bed and so on. There is high voltage inside, non-professionals can not open it. No using in damp or wet place in case of lightning strike in the rainy day Specification: Size: 16(L)x9(W)x5.5(H)cm Color: Black Package Included: 1 X 48 Volt 2.5 Amp Battery Charger

$13.99

In stock

Description: Durable Spring Returned Twist Action 3 Wire Throttle For Most 12v-48v Electric Scooters Fits With Included Set Screw For 7/8 Inch (22mm) Handlebars. Only Works On Right Hand side of handlebar Also includes Grip For Left Side Specification: Color: Black Material: Rubber+Plastic Length: about 113mm Wire: 3 Wires (Black, White, Red) Wire Length: about 1.2m Voltage: 24V/36V/48V Red wire is for positive+ blue is for negative- white wire is for signal Note: Please check the size measurement chart carefully before making payment Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm) The color of the actual items may slightly different from the listing images due to different computer screen Package Included: 1 X Pair 3 Wire Twist Throttle Grips

$4.99

In stock

Description: Detection hall method: Disconnect the controller and motor leads With the measurement of the diode file stalls measuring Hall, red pen leads to the motor leads to thin black line, black table pen followed by yellow-green blue, there should be 50 - 300 ohm resistance value and three lines of resistance difference of not more than 20, the Hall normal Measuring controller: Turn on the power, turn power and Hall power should be 4 - 5v voltage, the controller of the three Hall wire potential should be the same. Specification: Model: HX-HE Category: Hall Materials: Polymers Production process: integration Output signal: Digital Package Included: 1 X Scooter Motor Hall Element 3144

$0.92

In stock

Description: Detection hall method: Disconnect the controller and motor leads With the measurement of the diode file stalls measuring Hall, red pen leads to the motor leads to thin black line, black table pen followed by yellow-green blue, there should be 50 - 300 ohm resistance value and three lines of resistance difference of not more than 20, the Hall normal Measuring controller: Turn on the power, turn power and Hall power should be 4 - 5v voltage, the controller of the three Hall wire potential should be the same. Specification: Model: HX-HE Category: Hall Materials: Polymers Production process: integration Output signal: Digital Package Included: 10 X Scooter Motor Hall Element 3144

$2.99

In stock

Description: Fits for most 50cc-80cc scooters with short Case motor with 10'' rear wheel Specification: OEM: 669-18-30 Length: 669mm Top Width: 18mm Grove Angle: 30 Weight: 150g Fitment: Fit for: GY6, QMB/QMA 139,4 stroke engins Package Included: 1 X Drive Belt For GY6 4 Stroke

$4.99

In stock

Description: EU RoHS environmental certification Exquisite workmanship, nuanced Easy to install Specification: Handle Size: L63xW42xH23mm Line Length: 130cm Material: Acrylonitrile butadiene styrene Handle Standard: RoHS Handle Core: Red + 5V, black line ground wire, yellow wire then speed signal Handle Voltage: Working voltage 5V, hall voltage 0.8-4.2V Handle Waterproof: IP4 Handle Cover Size: 110 x 45mm Handle Cover Installation Diameter: 22mm Handle Cover Pull off force: 150N Handle Cover Torsional strength: 5 N.m. Handle Cover Installation depth: PA66 + GF20 Compatible for: 24v/36v/48v E-scooters (Using 3 wires on the speed controller) Package Included: 1 X Thumb Throttle 2 X Handle Covers

$9.35

In stock

Description: Perfect to replace your old or worn one. Specification: Model:442629 Color: Black Length: 67cm / 26.38" Width: 1.87cm / 0.74" Fitment: Used on all Yerf-dog go-karts with Tecumseh engines and belt driven torque-converters Package Included: 1 X Belt

$7.99

In stock

Description: Brand new Lithium battery charger of 36V. This industrial standard charger is ideal as a replacement or as a spare since it suits virtually all scooters that use a DIN (3-prong) connector. Can be used with many electric bikes, DIY and other. Specification: Model: LT01 Color: Black Size: 160mm*85mm*52mm(L*W*H) Input: AC 90-240V 50/60Hz Output: DC 36V MAX 1.8A Equal Changing Voltage: 44.50.3V Floating change voltage: 41.50.3V Connector: DIN 3 Plug type: 2 flat pin Note: If this plug doesn't fit the sockets in your country as we'll send you a free plug adapter Package Included: 1 X 36 Volt Power Charger With Plug

$12.99

In stock

Description: Anti-interference ability, can work in the muddy water Extend battery life, leisure and fitness at the same time, improve car mileage nearly doubled. Specification: Item name: E-bike Assist Sensor 5/8 magnet Material: ABS+PC Color(main): Black&silver System: PAS Magnet Type: 5 magnet/8 magnet Cable Length:80cm Wire Definition: Red Wire:+5V Yellow wire: GND(Negative electrode) Blue wire: Signal Packaged Included: 1 X E-bike Assist Sensor

$5.99

In stock

Description: The appearance of special personality,diferent from the traditional plastic key cover Using T6063 aluminum alloy, the classic two-color match For Suzuki/Yamaha door locks are available Specification: Material: T6063 aluminum Color: Black,sliver,red,orange Package Included: 1 X Scooter Aluminum Key Cover

$4.99

In stock

Description: Electric bike riding through the foot pedal rotation speed (and, like cycling) the controller will automatically detect your riding speed, thereby sending a signal intensity ranging from work to the motor. Motor will work interval to achieve the purpose of the foot control speed, so riding hearted.1 + 1 booster system takes full advantage of the inertia and supplemented by motor power the vehicle forward, to achieve both effort and energy saving As well as, reduce the burden on the battery, reducing battery output current. Effectively extending the distance mileage and battery life. It employs speed manual first, when you release the manual control, foot control 1 + 1 booster will work. Continued riding with help to extend the mileage of more than 30%-50% Specification: Color: Black Optional Type1: 8 Magnetic Disk Type2: 5 Magnetic Disk Size: As the picture shows Fitment: It is suitable for electric scooter, electric bicycle, mountain bike Note: Please check the size before buying Please allow manual measure difference Package Included: 1 X 8 Magnetic Disk Or 1 X 5 Magnetic Disk

$2.99

In stock

Description: Suitable for small surf electric scooter etc Replacement Drive Belt HTD 384-3M-12 Durable,easy to use Belt length is the overall size of the belt's loop measured as if the belt were cut between two adjacent teeth and laid out on a flat surface Specification: Color: Black Material:rubber Teeth number:128 Belt length:384mm(about 15.1'') Peak Distance Between Two Adjacent Belt Teeth:3mm (about 0.11") Width Of Belt:12mm (about 0.47") Method for Selecting Drive Belt: 1.Check The numbers and letters on The Old Belt. 2. If you can't find the numbers ane letters printed on belt: a) Measure the length of the belts loop. b) Measure the distance from peak to peak of two adjacent belt teeth. c) Measure the width of the belt. Package Included: 1 X Electric Scooter Drive Belt

$3.99

In stock

Description: Electric bike riding through the foot pedal rotation speed (and, like cycling) the controller will automatically detect your riding speed, thereby sending a signal intensity ranging from work to the motor. Motor will work interval to achieve the purpose of the foot control speed, so riding hearted.1 + 1 booster system takes full advantage of the inertia and supplemented by motor power the vehicle forward, to achieve both effort and energy saving As well as, reduce the burden on the battery, reducing battery output current. Effectively extending the distance mileage and battery life. It employs speed manual first, when you release the manual control, foot control 1 + 1 booster will work. Continued riding with help to extend the mileage of more than 30%-50% Specification: Color: Black Optional Type:1: 5 Magnetic Disk+90cm Wire 2: 8 Magnetic Disk+90cm Wire 3: 12 Magnetic Disk+90cm Wire Size: As the pictures show Wiring Instruction: SM Terminals Blue: Signal Red: Positive Yellow: Negative Fitment: It is suitable for electric scooter, electric bicycle, mountain bike Note: Please check the size before buying Please allow manual measure difference Package Included: 1 X Electric Scooter Booster Sensor 12 Magnetic Disk + Wire Or 1 X Electric Scooter Booster Sensor 8 Magnetic Disk + Wire Or 1 X Electric Scooter Booster Sensor 5 Magnetic Disk + Wire

$1.99

In stock

Description: Detection hall method: Disconnect the controller and motor leads With the measurement of the diode file stalls measuring Hall, red pen leads to the motor leads to thin black line, black table pen followed by yellow-green blue, there should be 50 - 300 ohm resistance value and three lines of resistance difference of not more than 20, the Hall normal Measuring controller: Turn on the power, turn power and Hall power should be 4 - 5v voltage, the controller of the three Hall wire potential should be the same. Specification: Model: HX-HE Category: Hall Materials: Polymers Production process: integration Output signal: Digital Package Included: 1 X Scooter Motor Hall Element 3144

$9.99

In stock

Description: DIY Electric Skateboard Parts Pulleys And Motor Mount Kit For 83/90/97MM Wheels. It is a 1:3, the small puley have 12 tooth, the big on have 36 tooth. If you want to build a dual drive skateboard, buy 2 sets. Specification: Timbering Material: 304 Steel Main Color: Sliver & Black Package Included: 1 X Motor Mount For 5065/5055 Motor (18MM Hole) 1 X Pulley For 83/90/97MM Wheel 1 X Pulley For Motor (For 8mm Shaft) 1 X 10MM Belt 1 X Fixing Plate With 6 Holes 6 X Bolt to Fix The Pulley On The Wheel 3 X Screw To Fix The Gear On The Wheel 2 X Screw To Fix The Gear On The Motor

$39.99

In stock

Description: Pulleys And Motor Mount Kit It is a 1:3, the small puley have 12 tooth, the big on have 36 tooth. If you want to build a dual drive skateboard, buy 2 sets. DIY electric skateboard parts pulleys and motor mount kit for 83/90/97MM wheels. Specification: Timbering Material: 304 Steel Main Color: Sliver & Black Package Included: 1 X Pulley For 83/90/97MM Wheel 1 X Pulley for motor For 8mm Shaft 1 X10MM belt 1 X Fixing Plate With 6 Holes 6 X Bolt to Fix The Pulley on The Wheel 4 X Screw to Fix the Gear on The Motor

$16.99

In stock

Description: Transmission is accurate, no slip at work, with a constant transmission ratio. Smooth transmission, with a buffer, shock absorption capacity, low noise. Easy maintenance, no lubrication, low maintenance costs. Bracket structure design fixed hole position can be adjusted motor 4 fixed screw position, thereby adjusting the size of the belt between the synchronous wheel elastic. Specification: Model: 509712 Color: Black Material: Surface oxidation Gear of Wheel: 48 tooth Gear of Motor: 16 tooth Bore of Wheel: 22mm Bore of Motor: 8mm Round Hole Diameter of Bracket: 18mm Bracket Width: 9mm Bracket Length: 112mm Belt Width: 10mm Belt Length: 225mm Screw of Wheel: 5 Screw of Motor: 1 Screw of Bracket: 5 Package Included: 1 X Pulley for Wheel 1 X Pulley for Motor 1 X Bracket 1 X Belt 11 X Screws

$24.99

In stock

Description: The air compressor is perfect when unexpected roadside emergency happens. It is ideal for inflating tires sports balls and other inflating jobs. Easy To Use. Just plug into your electric vehicle scooter plug for power and slip the universal adapter over any tire valve and you are ready to inflate Feature: Excellent for roadside emergencies Proper tire inflation saves you money with greater gas mileage and tire life Saves you a trip to the filling station Operates from the socket of DC 48v - 60V Built-In switch and gauge With inflator nozzle and sports needle Proper design for installing hose and cord Ideal for inflating all vehicle tires and other high-pressure inflatables Specification: Operate Voltage: DC 48V - 60V Color: Blue Power: 45W Pressure: 150PSI Size: 125mm*135mm*50mm Length of power line: 300mm Note: If the item continuously works half an hour, it need to be rest for 10 minutes then to work again. Package Included: 1 X Tire Inflator Air Pump Compressor

$10.99

In stock

Description: Transmission is accurate, no slip at work, with a constant transmission ratio. Smooth transmission, with a buffer, shock absorption capacity, low noise. Easy maintenance, no lubrication, low maintenance costs. Specification: Name: Skateboard component Model: 509771 Color: Black Material: Surface oxidation Gear of Wheel: 48 Gear of Motor: 16 Bore of Wheel: 22mm Bore of Motor: 8mm Belt Width: 10mm Belt Length: 225mm Screw of Wheel: 6 Screw of Motor: 3 Package Included: 1 X Pulley For Wheel 1 X Pulley For Motor 1 X Belt 9 X Screws

$11.99

In stock

Description: 36V motor brushed controller: Motor brush controller for Electric bicycle & scooter Fits standard 7/8 inches(22.2mm) handle bars Cable length is approximately 59 inches (1.5m) Specification: Material: Plastic Color: As shown Rated Voltage: DC 36 v Current Limit : 32A Rated Power: 1000 W Under Voltage Protection: 31.5V Matching Motor: DC brushed motor DC36V Throttle Twist Grips: Electric bike scooter twist throttle accelerator with power display, 5Led battery indicator. Throttle Works Voltage: DC5V Speed Adjusting Signal: 0.8V-4.3V Power Display Voltage: DC 36V Power Display: Normal: 35V above, 3 Led Green Half: 35V ~ 32V, Led Yellow Empty: 32V or less, Led Red Rotation Angle: 0 ~ 70 Working Temperature: -20 ~ +50 Controller Wires Interface Definition: Battery : Thick black (power negative) /thick red (power positive) Motor : Thick yellow (motor negative) /thick blue (motor positive) Ignition Switch : Thin red(VCC)/thin blue Indicator : Thin red (indicator power output) /thin black (indicator negative) Brake : Thin yellow (brake signal)/thin black(negative power) Speed Governor : Thin blue(speed handlebar signal input) /thin black (negtive power) /thin red(5V positive power) Charge Port : Thin red (charge input power positive) /thin black (power negative) Brake Light: Thin red (power positive) /thin black (power negative) Sport: Thin yellow /thin green(speed limit, connected the wires together) Package Included: 1 X 36V Throttle Grip With Normal Grip 1 X 36V 1000W Controller 1 X Black Terminal Ends

$28.99

In stock

1 - 30 of 56 items