Laser Equipment

There are 101 products

  • Sort By

Description: 1000mw Bluish Violet Laser Head Parts 405nm For Engraver DIY Engraving Machine Specification: Input voltage: 4.5-5V Color: blue-violet light Power: 1000mw wave length: 405nm Application: 1.Can be carved Hard wood, plastic, bamboo, rubber, leather, cut paper and so on. 2.Can NOT engrave Metal/Aluminum/Acrylic and any Retardant Material 3.This item is used for DIY Engraving Machine.Please note it. Package include: 1x Laser head(No power supply) Note: This laser module is used for NEJE DK-8-KZ . If not ,the power will less than 1000mw. Please make sure you do not mind. Thank you.

$21.99

In stock

Description: Aluminum Soft Leather Skiver Splitter Machine Edge Skiving Cutting Tool Specifications: Material: Aluminum Color: Silver Size: 165x145x118mm / 6.5*5.7*4.6 inch Suitable For: Leather skiving Features: - Upgrade folder for quick blade replacement mode, change blades in one step. - Upgraded stainless steel wheel nylon wheel, no longer worried about damage. - Flexibleas long as there is a small piece of flat work surface can be used. - Easy installation, all the parts after computer work planning, laser cutting, with precision. - The use of energy, through the reasonable design of part Angle coordinate - Maintenance easy, the whole machine adopts aluminum bracket, stainless steel screws, stainless steel knife holder, don't have to worry about the rust problem.The most commonly used double-sided razor blade, cutting tool and three holes blade support most of the industry. Installation Step: 1. Put into built-screw nut,and the marbles of screw nut is inside. 2. Install rectangular connectors 3. Connect the two thick aluminum 4. Connect the two thin aluminum 5. Screwed into the screw can be fixed 6. Install the other rectangular connectors 7. Connect the beams and columns 8. Install Loading bay 9. Install the stainless steel round,it recommended tightening the screws and non-rotating wheel to prevent slipping and hurt fingers;If you want to rotate feeding,just loose screws 10. Use the longest screws fix the Loading bay 11. Install the blade and screw with a hexagonal wrench 12. Installed the semicircle base 13. Use G clamp fix on the machine table Note: 1. Before use pls make sure that all screws are tightened and Aluminum will not shift and shake when we use force;Machine and work surface using G clamp to fix;Vertical and horizontal of aluminum is in good condition. 2. The peak mouth of blade and the surface of stainless steel round keep parallel before use 3. Viewed from the side,the peak mouth of blade and the centerline of the wheel apart about 3mm because blade too far back lead to the leather get stuck and can't pull them 4. Blade clamp must tighten with a screwdriver and wrench. Packing Included: 1 x Leather skiving machine (Unassembled) 1 x Blade 1 x Operating Instructions More Details:

$99.9

In stock

Description: 808nm 500mW Infrared IR Laser Diode LD TO-18 5.6mm Specifications: Material: Metal Size: about 1cm/0.39" [Conversion: 1cm=0.3937 inch, 1 inch=2.54 cm] Wavelength: 808nm Power Output: CW 500mW Working Current: I<350mA Working Voltage: 2.2V Sealed Size: TO18(5.6mm) Lifespan: >10000 hours Attention: 1.Laser beam is harm for eyes during process please avoid any directly see on the aperture. 2.Please use the suitable LD power driver, instant reverse current can not exceed than 25uA reverse voltage cannot exceed than 2V,otherwise the LD will be damaged. 3.Please install the LD well before connecting to the power.The initial input voltage should be zero. 4.To increase/ decrease the current gradually for avoiding any current pulse which will damage the LD. 5.Please store or use the LD under dry and air flow ambient.To avoid any situation of condensation which will damage the LD. 6.Working under high temperature will increase the threshold current and decrease the efficiency conversion,speed up the aging of the LD. 7.The exceed power output will speed up the aging of the LD. 8.To use the LD with enough head dispensing or uner the cooling ambient. 9.Laser diode belongs to electrostatic sensitive components. Should deal with anti-electrostatic method. To touch the LD directly unless humanbody is well connect with ground. Otherwise the LD will be burned easily. To wear anti-eletrostatic wrist band is necessary. Package Included: 1 x 808nm 500mW Laser Diode More Details:

$5.65

In stock

Description: Brand EleksMaker Model: LA03-2300 Name Laser Module Power 2300mW /2.3W Wavelength 445nm Luminous color Blue Focus Yes, the minimum focus <1mm Input voltage DC 12V Current > 2A Power supply interface 2 * 2.54 Control Interface 2 * 2.54 (TTL can be control switch PWM can be control power) Cooling Radiator and cooling fan Driving mode external ACC constant current drive Module material Copper Collimating lens Optical glass coating Features: 1.445nm 2.3W focusable blue laser module,with TTL and PWM functions (TTL can control the switch, PWM can control the power). 2.DC 12V 2*2.54 power port. 3.Aircraft aluminum heatsink with cooling fan ensure long working time continuously. 4.Equipped with constant-current driver board ensure stable output optical power,low heat, no external driver board needed,easy to use. 5.Suitable for industrial laser engraving machine equipment usage. Note : The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. Package Included: 1X 2.3W Focusable Blue Laser Module 1X Power Adapter 1X Plug Adapter More Details:

$79.9

In stock

Description: MACH3 Auto-Check Instrument Engraver Machine CNC Z Axis Router Mill Touch Plate Tool Specifications: Wire Material: Copper Diameter: About 35mm Thickness: About 19.2mm Effective Surface Diameter: 25mm Cable Length: 1.2 M Diameter: 0.2 square feet Using System: NCStudio System Color: Black & Red, Black & White Features: 1. Black base: organic insulating materials,high voltage 1000V or more. 2. Material impact resistance,fatigue resistance,resistance to deformation. 3. Metal parts:aluminum,light metal material,soft texture,excellent electrical properties. 4. Relative brass,iron,the head is not easy to damage. 5. All components of non-magnetic materials 6. Increase efficiency, it can speed up to measure the distance between the Z axis and engraving items. Using Method: 1. Connect the wire of this tool check insturment to the tool connector of your Control board of the machine then the control board's GND connect to the frame of your router ( the frame of the router and the spindle must have connections) 2. Two ways to connect this item: - If your interface board has the limit switch port or other probe port, you can connect it to that port - If your interface board does not have that port, your driver board has that port,you can connect it to the driver board's limit switch port 3. Then in the Mach 3, you need to setup the probe (Mach3 --- Config---Ports and Pins---Input signals Probe enabled, the pin number type the one you use) and the Auto-Tool-Zero.in the attachment, it is the code, you can edit it as your requirements Note: 1. Red wire conect to the controller card adjusting-tool signal. 2. Black wire connect to the G on controller card. 3. When you connect feeler block well, and start device (not the spindle motor) please use alligator clip click the surface of the feeler block, see if the Z axis will act or not. If no problem, and connect the spindle motor by alligator clip. Package Includes: 1 x MACH3 Auto-Check Instrument More Details:

$4.55

In stock

Description: 75W 3.5m 220-240V Cooling Pump Water Engraving Machine CNC Milling Tool Specifications: Item: 3.5 m 75W Water Pump Structure: Single-stage Pump Theory: Reciprocating Pump Voltage: 220-240VAC Power: 75W Frequency: 50Hz Maximum flow (Output): 3500L/H Water nozzle diameter (Diameter): 6mm Maximum Head (H-Max): 0-3.5M Package Size: About 110x125x160mm Application: Engraving machine, CNC milling machine, etc. Features: 1. Copper nozzle, sound-free designed, high-lift submersible pumps 2. ABS+PC plastic cover, wearproof, not easy to deformation 3. 75w 3.5m engraving machine cooling water pump tool for cnc router 2.2kw spindle motor and 1.5kw spindle motor. Note: Please do not dry for using, the water level must twice than the water pump . Package Includes: 1 x 75W 3.5m Water Pump More Details:

$26.9

In stock

Description: High Power Molybdenum Laser Reflection Lens is widely used in laser processing for example, cutting, drilling, sculpture,engraving and laser system. Specifications: Material:Molybdenum Color:White&Light Diameter: 20mm Thinckness:3mm Features: 1.Withstanding high power density. 2.Compact and wearable film coating. 3.Film is solid, resistant to wipe 4.Double-side film,the filterability can reach 99%. 5.Widely used in laser processing for example, cutting, drilling, sculpture,engraving and laser system. Notice: Please allow 1-5mm error due to manual measurement. Package included: 120mmLaser Reflection Lens

$4.99

In stock

Description: Protection wavelength range: 650nm 660nm Visible light transmittance: >55% Optical Density: > 4.0, (OD +4, OD +5) Attenuation: (10-6 Features: All-round absorption. Comfortable safe and reliable, will protect your eyes from the excessive red laser rays. Package Included: 1pcs Red Laser Protective Goggles More Details:

$8.56

In stock

Description: 42HS34-1304A 1.8 Hybrid Stepper Motor 2 Phase For Laser Engraver Machine 3D Printer CNC Router Specifications: Brand: EleskMaker Model: 42HS34-1304A Motor length: 34mm Diameter of axle: 4.5mm The front shaft length: 20mm Static torque: 2.2kg.cm Size: 42mm*42mm*34mm Certification: CE, ROHS Scope: Widely used for laser engraver machine, 3D printers,monitor equipment,medical/textile/packaging machinery,stage lighting,ect Technique parameter: Item Specifications Step Angle 1.8 Insulation Class B Phase 2 Voltage 3.12 V Current 1.3 A Resistence 2.4 Inductance/Phase 2.8 mH Holding Torque 28 N.cm Mass 0.22 KG Tips: The stepper motor is the replacement part to the following laser engraving machines link: Click Here:) Package Includes: 1 x 42HS34-1304A Stepper Motor More Details:

$11.9

In stock

Description: High Power 20mm Silicon Laser Reflection Len For Engraving and Laser Systems Specifications: Material:Silicon Color:Gold Diameter: 20mm Thinckness:3mm Features: - Withstanding high power density. - Compact and wearable film coating. - Film is solid, resistant to wipe - Double-side film,the filterability can reach 99%. - Widely used in laser processing for example, cutting, drilling, sculpture,engraving and laser system. Notice: 1. Please allow 1-5mm error due to manual measurement. 2.The colors may have different as the difference display, please understand. Package included: 1x Laser Reflection Lens 1x Storage Case More Details:

$7.59

In stock

Specifications: Material: Rubber Theme: Stamp Color: Orange Thickness: 2.3mm A4 Size: 297mm x 210mm / 11.7" x 8.3" Features: - This rubber plate with A4 size 2.3mm thicknes natural rubber, - Chemical, oil, abrasion resistance, soft texture, easy cutting and engraving. - Smooth Engraving, having a fine ink loading, precise printing. - Avoiding distortion, suitable for printing small words and figures of stamp. - Can be cut by laser engraver to make stamp for commercial and personal use. Package Included: 1 x Rubber Stamp Sheet More Details:

$7.79

In stock

Description: A4 Inkjet Laser Printing Film can be used to make stencil in screen printing, hot stamping and pad printing. Specifications: Color: Transparent Size: 29.7 x 21cm Features: - ASC Non-Waterproof Ink-Jet and Laser Printing Film is a specially coated, clear film that absorbs quick drying ink, and controls the shape of fine lines and half tones; - It can be used to make stencil in screen printing, hot stamping and pad printing. - Ink-jets achieve better quality because heat isn't used to set the ink. - This kind of film is only coated on one side. Print on the coated (matte) side of the film. - If you print on the glossy uncoated side, the ink will not dry because it is not absorbed by the coating. Package Included: 20 x Printing Plate-Making Notes: 1.This film also can be used in your laser printer 2.Your wet finger will stick to the coated side 3.Printing side is the non-smooth side with coating solution.

$6.55

In stock

Description: 50Pcs Transfer Foil Paper Hot Laminator Red for Laser Printer,Mainly used for invitations, business cards, calendar, certificates and other gold lettering. Specification: Color: Red Material: Foil Paper Size: 20cm x 28cm/7.9" x 11" Features: Mainly used for invitations, business cards, calendar, certificates and other gold lettering. Suitable for a large number of small number of type copy shop use. Using method: Bronzing paper to the front cover in laser printer to print text, laminator heating up to 160 (plastic machine models with different temperature display will not be the same) glittering gilt lettering or pattern formed by laminating machine can be. Use simple Package Included: 50Pcs x Foil Paper Notice: 1.Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid. 2.The color may have different as the difference display,pls understand. 3.Must be laser print or copy of the text pattern can be used.

$3.99

In stock

Description: 2.3mm A4 Laser Rubber Sheet can be cut by laser engraver to make stamp for commercial and personal use. Specifications: Theme: Stamp Material: Rubber Color: Gray Thickness: 0.09"/2.3mm Size: 11.6" x 8.26" x 0.09"/297 x 210 x 2.3mm Features: - This rubber plate with A4 size 2.3mm thicknes natural rubber, can be cut by laser engraver to make stamp for commercial and personal use. - Have fine, soft texture, easy cutting and engraving. - Smooth Engraving, having a fine ink loading, precise printing. - Avoiding distortion, suitable for printing small words and figures of stamp. - Chemical, oil, abrasion resistance. Package Included: 1 x Rubber Sheet Note: 1.Please allow 1-3mm error due to manual measurement. Please make sure you do not mind before you bid. 2.The colors may have different as the difference display, please understand.

$7.15

In stock

Description: Transparent A3 Inkjet Laser Printing Film can be used to make stencil in screen printing, hot stamping and pad printing. Specifications: Color: Transparent Size: 42 x 29.6cm Features: - ASC Non-Waterproof Ink-Jet and Laser Printing Film is a specially coated, clear film that absorbs quick drying ink, and controls the shape of fine lines and half tones; - It can be used to make stencil in screen printing, hot stamping and pad printing. - Ink-jets achieve better quality because heat isn't used to set the ink. - This kind of film is only coated on one side. Print on the coated (matte) side of the film. - If you print on the glossy uncoated side, the ink will not dry because it is not absorbed by the coating. Package Included: 20 x Printing Plate-Making Notes 1.This film also can be used in your laser printer. 2.Your wet finger will stick to the coated side. 3.Printing side is the non-smooth side with coating solution.

$11.15

In stock

EleksMaker EleksDraw XY Plotter Pen Drawing Machine Video Show: More Machine Details Show: More Works Show: Supported Software Interface: EleksCAM Softwaer Download Link: Click Here Description: EleksMaker EleksDraw 2 Axis CNC XY Plotter Pen Drawing Robot Drawing Machine 1600mW This newest drawing robt will replace of your hands to finish this works just by the fool-style open source software(EleksCAM,Inkscape) controlled. It is an extremely versatile machine, designed to serve a wide variety of everyday and specialized drawing and writing needs on almost any flat surface. It allows you to use your computer to produce writing that appears to be handmade, complete with the unmistakable appearance of using a real pen (as opposed to an inkjet or laser printer) to address an envelope or sign your name. And it does so with precision approaching that of a skilled artist, and just as importantly using an arm that never gets tired. Specifications: Type DIY 2 Axis Smart Drawing Robot Brand EleksMaker Model EleksDraw Laser Drive Board Model Mana SE Stepper Motor Model 42H34S-1304A Material Acrylic Plate, Aluminum Rod Color White,Blue,Dark Laser Power 1.6W / 1600mW Input Power AC 110-220V Output Power DC 12V Current 5A Engraving Accuracy 0.1mm Continue Working Time More than 10 hours Supported Software EleksCAM, InkSpace Supported System Window XP, WIN7/8/10 Machine Connected Port Micro-USB Matched Bluetooth BlueTooth 4.0 10m Engraving Area Apprex. 280x200mm Machine Size Apprex. 450x370x100mm Package Box Size Apprex. 500x400x130mm Machine Net Weight Apprex. 2.0Kg Package Weight Apprex. 3.5Kg Features: EleksMaker EleksDraw DIY mini 2 axis drawing robot machine XY structure with stepper motor driving, high accuracy up to 0.1mm Large working stroke up to 28 x 20cm Comes tested, but without assembled With 1600mW powerful laser module Applications: Formal invitations Place cards for formal dining Signing diplomas and other certificates Addressing envelopes and boxes Decorating lunch bags Computer generated artwork Technical drawing Writing signatures Note: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here EleksDraw Official Instruction Link: Click Here Package included: 1 x EleksDraw Drawing Machine ( without laser module ) 1 x 1600mW Laser Module 1 x Power Adapter 1 x USB Cable 1 x Plug Adapter

$259.9

In stock

EleksMaker EleksDraw XY Plotter Pen Drawing Machine Video Show: More Machine Details Show: More Works Show: Supported Software Interface: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here Description: EleksMaker EleksDraw 2 Axis CNC XY Plotter Pen Drawing Robot Drawing Machine 5500mW This newest drawing robt will replace of your hands to finish this works just by the fool-style open source software(EleksCAM,Inkscape) controlled. It is an extremely versatile machine, designed to serve a wide variety of everyday and specialized drawing and writing needs on almost any flat surface. It allows you to use your computer to produce writing that appears to be handmade, complete with the unmistakable appearance of using a real pen (as opposed to an inkjet or laser printer) to address an envelope or sign your name. And it does so with precision approaching that of a skilled artist, and just as importantly using an arm that never gets tired. Specifications: Type DIY 2 Axis Smart Drawing Robot Brand EleksMaker Model EleksDraw Laser Drive Board Model Mana SE Stepper Motor Model 42H34S-1304A Material Acrylic Plate, Aluminum Rod Color White,Blue,Dark Laser Power 5.5W / 5500mW Input Power AC 110-220V Output Power DC 12V Current 5A Engraving Accuracy 0.1mm Continue Working Time More than 10 hours Supported Software EleksCAM, InkSpace Supported System Window XP, WIN7/8/10 Machine Connected Port Micro-USB Matched Bluetooth BlueTooth 4.0 10m Engraving Area Apprex. 280x200mm Machine Size Apprex. 450x370x100mm Package Box Size Apprex. 500x400x130mm Machine Net Weight Apprex. 2.0Kg Package Weight Apprex. 3.5Kg Features: EleksMaker EleksDraw DIY mini 2 axis drawing robot machine XY structure with stepper motor driving, high accuracy up to 0.1mm Large working stroke up to 28 x 20cm Comes tested, but without assembled With 5500mW powerful laser module Applications: Formal invitations Place cards for formal dining Signing diplomas and other certificates Addressing envelopes and boxes Decorating lunch bags Computer generated artwork Technical drawing Writing signatures Note: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here EleksDraw Official Instruction Link: Click Here Package included: 1 x EleksDraw Drawing Machine ( without laser module ) 1 x 5500mW Laser Module 1 x Power Adapter 1 x USB Cable 1 x Plug Adapter

$469.9

In stock

EleksMaker EleksDraw XY Plotter Pen Drawing Machine Video Show: More Machine Details Show: More Works Show: Supported Software Interface: EleksCAM Softwaer Download Link: Click Here Description: EleksMaker EleksDraw 2 Axis CNC XY Plotter Pen Drawing Robot Drawing Machine 2500mW This newest drawing robt will replace of your hands to finish this works just by the fool-style open source software(EleksCAM,Inkscape) controlled. It is an extremely versatile machine, designed to serve a wide variety of everyday and specialized drawing and writing needs on almost any flat surface. It allows you to use your computer to produce writing that appears to be handmade, complete with the unmistakable appearance of using a real pen (as opposed to an inkjet or laser printer) to address an envelope or sign your name. And it does so with precision approaching that of a skilled artist, and just as importantly using an arm that never gets tired. Specifications: Type DIY 2 Axis Smart Drawing Robot Brand EleksMaker Model EleksDraw Laser Drive Board Model Mana SE Stepper Motor Model 42H34S-1304A Material Acrylic Plate, Aluminum Rod Color White,Blue,Dark Laser Power 2.5W / 2500mW Input Power AC 110-220V Output Power DC 12V Current 5A Engraving Accuracy 0.1mm Continue Working Time More than 10 hours Supported Software EleksCAM, InkSpace Supported System Window XP, WIN7/8/10 Machine Connected Port Micro-USB Matched Bluetooth BlueTooth 4.0 10m Engraving Area Apprex. 280x200mm Machine Size Apprex. 450x370x100mm Package Box Size Apprex. 500x400x130mm Machine Net Weight Apprex. 2.0Kg Package Weight Apprex. 3.5Kg Features: EleksMaker EleksDraw DIY mini 2 axis drawing robot machine XY structure with stepper motor driving, high accuracy up to 0.1mm Large working stroke up to 28 x 20cm Comes tested, but without assembled With 2500mW powerful laser module Applications: Formal invitations Place cards for formal dining Signing diplomas and other certificates Addressing envelopes and boxes Decorating lunch bags Computer generated artwork Technical drawing Writing signatures Note: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here EleksDraw Official Instruction Link: Click Here Package included: 1 x EleksDraw Drawing Machine ( without laser module ) 1 x 2500mW Laser Module 1 x Power Adapter 1 x USB Cable 1 x Plug Adapter

$239.9

In stock

EleksMaker EleksEgg Egg Drawing Robot Machine Presenting: EleksMaker EleksEgg Drawing on Bulb & Golfball: More EleksEgg CNC Drawing Machine Detials: Supported Software Interface: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here EleksMaker EleksEgg CNC Drawing Machine Egg Writing Robot DIY Education Tool EleksMaker EleksEgg Instruction: 1. An EleksEgg is a compact, easy to use art robot that can draw on small spherical and egg-shaped objects. 2. EleksEgg have been used as educational and artistic pieces in museums and workshops. 3. An EleksEgg is a highly adjustable machine, designed to draw on all kinds of things that are normally "impossible" to print on. 4. Not just eggs but Ping pong balls, golf balls, lacrosse balls, large marbles, stone balls, ball bearings, mini pumpkins, light bulbs, holiday ornaments and wine glasses are just some of the other items that have been drawn on. You can print on almost anything that's sturdy, spherical or ellipsoidal, will fit in the robot, and has a fairly smooth surface. Specifications: Brand EleksMaker Model EleksEgg Controller Board EleksMaker Mana SE Stepping Motor 42H34S-1304A Main Material Alumium Alloy Color White/ Black/ Blue Machine Size Apprex. 210x140x100mm Package Size Apprex. 310x240x160mm Machine Weight Apprex. 1kg Package Weight Apprex. 2kg Working Power AC 110-220V Output Power 12V Output Current 2.5A Continuous Work Time More than 10h Communication Port Micro-USB Matched Blue Tooth BlueTooth4.0 10m Supported Software EleksCAM, InkScape Supported Systems Windows XP, WIN 7/8/10 Features: - The EleksEgg is designed for rigidity, ease of use, and faster setup. - Adopt an appropriate industrial design based on offering eggs structures and high speed engraving in different situation. - Use Alumium Alloy and PMMA to make EleksEgg machine become faster and precisely. - Mana SE Controller have new eletronic component arrangement, high speed micro USB connecter, PWM laser connecter, CNC metal Switch. - The EleksEgg fits spherical and egg-shaped objects from roughly the size of a gum ball to that of a light bulb - about 1 to 3.5 inches in diameter (2.5 - 9 cm). - Perfect for ping pong balls, golf balls, chicken eggs, and similarly sized objects. Or as the Education Toy in museums and workshops. Note: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here Package Includes: 1 x EleksEgg CNC Drawing Machine Kit

$179.9

In stock

Decription: EleksMaker LA03-7000 445nm 7000mW Blue Laser Module can engrave on stainless steel surface. Specification: Lens Material Highly permeable membrane optical glass Module Material Copper Laser wavelength 445nm (blue) Output power Max.7W Average 5.5W Supply voltage 12V DC(PWM) 5V DC(TTL) Supply current > 2A Interface 3 * 2.54 (power supply + PWM) 2 * 2.54 (TTL) Light form Unadjustable, Point-shape and focus Cooling method Forced air cooling Other function interfac TTL or PWM interface Working characteristic Continuous light can work for a long time Features: 1. Can engrave on stainless steel surface. 2. Aircraft aluminum heatsink with cooling fan ensure long working time continuously 3. Equipped with constant-current driver board ensure stable output optical power,low heat no external driver board needed,easy to use 4. Suitable for industrial laser engraving machine equipment usage 5. The focus head is not adjustable and will come with a focal length measurement column, easy to use. Engraving Material Note: 1. Can engraving materials:stainless steel ,anodized aluminum, wood, bamboo, plastic, paper, leather, bank card, rubber 2. Can not engraving material: iron,aluminum,stone, ceramic, shell, light-reflecting material, transparent material Note: 1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. Please note that the laser module should work for less than half an hour in one time. And then continue to work after cooling down to ensure the period of use. 3. We will send you a plug adapter according to your country. 4. Usually use the PWM 3pin connector. The PWM/TTL switch with light indicated is used for switching PWM or TTL mode. 5. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. Package included: 1X 7W Blue Laser Module 1X Power Adapter 1X Plug Adapter DIY Projects with Eleksmaker:

$249.9

In stock

EleksMaker EleksDraw Pro Metal XY Plotter Pen Drawing Machine Video: More Machine Details Show: More Works Show: Supported Software Interface: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here Description: EleksMaker EleksDraw Pro Metal 2 Axis XY Plotter Pen Drawing Robot Drawing Machine This newest metal drawing robot will replace of your hands to finish this works just by the fool-style open source software(EleksCAM,Inkscape) controlled. It is an extremely versatile machine, designed to serve a wide variety of everyday and specialized drawing and writing needs on almost any flat surface. It allows you to use your computer to produce writing that appears to be handmade, complete with the unmistakable appearance of using a real pen (as opposed to an inkjet or laser printer) to address an envelope or sign your name. And it does so with precision approaching that of a skilled artist, and just as importantly using an arm that never gets tired. Specifications: Type Metal DIY 2 Axis Smart Drawing Robot Brand EleksMaker Model EleksDraw Pro Laser Drive Board Model Mana SE Stepper Motor Model 42H34S-1304A Main Material Metal Color Phantom Blue Obsidian Black Input Power AC 110-220V Output Power DC 12V Current 5A Engraving Accuracy 0.1mm Continue Working Time More than 10 hours Supported Software EleksCAM, InkSpace Supported System Window XP, WIN7/8/10 Machine Connected Port Micro-USB Matched Bluetooth BlueTooth 4.0 10m Engraving Area Apprex. 280x200mm Machine Size Apprex. 450x370x100mm Package Box Size Apprex. 500x400x130mm Machine Net Weight Apprex. 3.0Kg Package Weight Apprex. 4.5Kg Features: EleksMaker EleksDraw Pro Metal DIY mini 2 axis drawing robot machine EleksMaker EleksDraw Pro all are made of Metal material XY structure with stepper motor driving, high accuracy up to 0.1mm Large working stroke up to 28 x 20cm Comes tested, but without assembled This kind of the drawing machine without laser module, you can equip laser module with the machine by yourselves. Applications: Formal invitations Place cards for formal dining Signing diplomas and other certificates Addressing envelopes and boxes Decorating lunch bags Computer generated artwork Technical drawing Writing signatures Note: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here Package included: 1 x EleksDraw Pro Drawing Machine ( without laser module ) 1 x Power Adapter 1 x USB Cable 1 x Plug Adapter

$259.9

In stock

EleksMaker EleksDraw Pro Metal XY Plotter Pen Drawing Machine Video: More Machine Details Show: More Works Show: Supported Software Interface: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here Description: EleksMaker EleksDraw Pro Metal 2 Axis XY Plotter Pen Drawing Robot Drawing Machine 500mW This newest metal drawing robot will replace of your hands to finish this works just by the fool-style open source software(EleksCAM,Inkscape) controlled. It is an extremely versatile machine, designed to serve a wide variety of everyday and specialized drawing and writing needs on almost any flat surface. It allows you to use your computer to produce writing that appears to be handmade, complete with the unmistakable appearance of using a real pen (as opposed to an inkjet or laser printer) to address an envelope or sign your name. And it does so with precision approaching that of a skilled artist, and just as importantly using an arm that never gets tired. Specifications: Type Metal DIY 2 Axis Smart Drawing Robot Brand EleksMaker Model EleksDraw Pro Laser Drive Board Model Mana SE Stepper Motor Model 42H34S-1304A Main Material Metal Color Phantom Blue Obsidian Black Laser Power 500mW Input Power AC 110-220V Output Power DC 12V Current 5A Engraving Accuracy 0.1mm Continue Working Time More than 10 hours Supported Software EleksCAM, InkSpace Supported System Window XP, WIN7/8/10 Machine Connected Port Micro-USB Matched Bluetooth BlueTooth 4.0 10m Engraving Area Apprex. 280x200mm Machine Size Apprex. 450x370x100mm Package Box Size Apprex. 500x400x130mm Machine Net Weight Apprex. 3.0Kg Package Weight Apprex. 4.5Kg Features: EleksMaker EleksDraw Pro Metal DIY mini 2 axis drawing robot machine EleksMaker EleksDraw Pro all are made of Metal material XY structure with stepper motor driving, high accuracy up to 0.1mm Large working stroke up to 28 x 20cm Comes tested, but without assembled With 500mW power laser module Applications: Formal invitations Place cards for formal dining Signing diplomas and other certificates Addressing envelopes and boxes Decorating lunch bags Computer generated artwork Technical drawing Writing signatures Note: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here Package included: 1 x EleksDraw Pro Drawing Machine 1 x 500mW Laser Module 1 x Power Adapter 1 x USB Cable 1 x Plug Adapter

$299.9

In stock

EleksMaker EleksDraw Pro Metal XY Plotter Pen Drawing Machine Video: More Machine Details Show: More Works Show: Supported Software Interface: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here Description: EleksMaker EleksDraw Pro Metal 2 Axis XY Plotter Pen Drawing Robot Drawing Machine 1600mW This newest metal drawing robot will replace of your hands to finish this works just by the fool-style open source software(EleksCAM,Inkscape) controlled. It is an extremely versatile machine, designed to serve a wide variety of everyday and specialized drawing and writing needs on almost any flat surface. It allows you to use your computer to produce writing that appears to be handmade, complete with the unmistakable appearance of using a real pen (as opposed to an inkjet or laser printer) to address an envelope or sign your name. And it does so with precision approaching that of a skilled artist, and just as importantly using an arm that never gets tired. Specifications: Type Metal DIY 2 Axis Smart Drawing Robot Brand EleksMaker Model EleksDraw Pro Laser Drive Board Model Mana SE Stepper Motor Model 42H34S-1304A Main Material Metal Color Phantom Blue Obsidian Black Laser Power 1600mW / 1.6W Input Power AC 110-220V Output Power DC 12V Current 5A Engraving Accuracy 0.1mm Continue Working Time More than 10 hours Supported Software EleksCAM, InkSpace Supported System Window XP, WIN7/8/10 Machine Connected Port Micro-USB Matched Bluetooth BlueTooth 4.0 10m Engraving Area Apprex. 280x200mm Machine Size Apprex. 450x370x100mm Package Box Size Apprex. 500x400x130mm Machine Net Weight Apprex. 3.0Kg Package Weight Apprex. 4.5Kg Features: EleksMaker EleksDraw Pro Metal DIY mini 2 axis drawing robot machine EleksMaker EleksDraw Pro all are made of Metal material XY structure with stepper motor driving, high accuracy up to 0.1mm Large working stroke up to 28 x 20cm Comes tested, but without assembled With 1600mW power laser module Applications: Formal invitations Place cards for formal dining Signing diplomas and other certificates Addressing envelopes and boxes Decorating lunch bags Computer generated artwork Technical drawing Writing signatures Note: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here Package included: 1 x EleksDraw Pro Drawing Machine 1 x 1600mW Laser Module 1 x Power Adapter 1 x USB Cable 1 x Plug Adapter

$329.9

In stock

EleksMaker EleksDraw Pro Metal XY Plotter Pen Drawing Machine Video: More Machine Details Show: More Works Show: Supported Software Interface: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here Description: EleksMaker EleksDraw Pro Metal 2 Axis XY Plotter Pen Drawing Robot Drawing Machine 5500mW This newest metal drawing robot will replace of your hands to finish this works just by the fool-style open source software(EleksCAM,Inkscape) controlled. It is an extremely versatile machine, designed to serve a wide variety of everyday and specialized drawing and writing needs on almost any flat surface. It allows you to use your computer to produce writing that appears to be handmade, complete with the unmistakable appearance of using a real pen (as opposed to an inkjet or laser printer) to address an envelope or sign your name. And it does so with precision approaching that of a skilled artist, and just as importantly using an arm that never gets tired. Specifications: Type Metal DIY 2 Axis Smart Drawing Robot Brand EleksMaker Model EleksDraw Pro Laser Drive Board Model Mana SE Stepper Motor Model 42H34S-1304A Main Material Metal Color Phantom Blue Obsidian Black Laser Power 5500mW / 5.5W Input Power AC 110-220V Output Power DC 12V Current 5A Engraving Accuracy 0.1mm Continue Working Time More than 10 hours Supported Software EleksCAM, InkSpace Supported System Window XP, WIN7/8/10 Machine Connected Port Micro-USB Matched Bluetooth BlueTooth 4.0 10m Engraving Area Apprex. 280x200mm Machine Size Apprex. 450x370x100mm Package Box Size Apprex. 500x400x130mm Machine Net Weight Apprex. 3.0Kg Package Weight Apprex. 4.5Kg Features: EleksMaker EleksDraw Pro Metal DIY mini 2 axis drawing robot machine EleksMaker EleksDraw Pro all are made of Metal material XY structure with stepper motor driving, high accuracy up to 0.1mm Large working stroke up to 28 x 20cm Comes fully assembled, tested, and ready to use With 5500mW power laser module Applications: Formal invitations Place cards for formal dining Signing diplomas and other certificates Addressing envelopes and boxes Decorating lunch bags Computer generated artwork Technical drawing Writing signatures Note: EleksCAM Softwaer Download Link: Click Here InkScape Softwaer Download Link: Click Here Package included: 1 x EleksDraw Pro Drawing Machine 1 x 5500mW Laser Module 1 x Power Adapter 1 x USB Cable 1 x Plug Adapter

$569.9

In stock

Specifications: Material: Gold-Plated Silicon Diameter: 19mm Thickness: 2mm (1cm=0.39Inches) Features: Usually a complete beam path outside the laser tube requires three reflect mirror and a focus lens. Laser will loss when it travels, so the laser machine need a higher reflectivity mirror. Good Reflecive Ability, The Reflection of Cloudray Mirrors can Reach to 99.2%. Gold-Plated Coating Film,More Durable. Can Withstand 200 Watt Laser. Silicon and Molybdenum is the main material of reflect mirror. The molybdenum mirror does not need coating film they are able to work in harsh environments. Silicon reflect mirror is coated with gold film, to improve the reflectivity of the mirror, then to improve the efficiency of the machine. For Molybdenum mirror, there is no coating on the surface, but the reflection is low, maybe 80%. For silicon mirror, it is coated with dielectric or golden film. Golden mirror is better than Mo mirror, as the reflection is higher. Package Included: 1 x Si Coated Gold Reflector

$9.35

In stock

Description: A4 Rubber Laser Engraving Pad ,is applicable to all types of laser engraving seal layout, environmental protection, tasteless, easy to carve, with all kinds of printing oil, excellent oil resistance. Specification Theme: Stamp Material: Rubber Color: Orange+Grey Thickness: 2.3mm A4 Size: 297mm x 210mm / 11.7" x 8.3" Features: 1. Product environmental formula, a hot-pressing, can be directly carved, without flooding, low odor, ink ink quickly out of ink even smooth, with all kinds of osmotic ink used in conjunction with. 2. Applicable to all types of laser engraving seal layout, environmental protection, tasteless, easy to carve, with all kinds of printing oil, excellent oil resistance. Package Included: 2 x Rubber Sheets

$14.99

In stock

How to Assemble The Laser Machine: How cool the laser machine it can be. (Taking 1.6W A5 laser machine as example.) DIY Projects Show with EleksLaser: Specifications: Brand EleksMaker Model EleksLaser-A5 pro 5.5W Material Stainless Steel and Acrylic Working Voltage DC 12V Working Current DC 2.5A Laser Power 5.5W / 5500mW Control Software System Advanced Edition(GRBL)/ Simple version(Benbox) Engraving Accuracy 0.01mm Engraving Area 22x17cm / 8.66 x 6.69inch (maximum) Engraved object height limitatiion No Limitation Packaging Size 36x35X18cm / 14.17x13.78x7.09inch (L*W*H) Package Weight 4.30kg Certification CE, FCC, FDA(Please contact us if you need them) Function ideal for amateur laser engraving usage low-light positioning and freedom positioning functions. Features 22x17cm ultra large engraving area,gantry shape design, no engraving height limitation. Three stepper motor drive providing faster moving speed. 5500mW violet laser module with heatsink, high laser engraving power and long-term available. can print any pictures easily Package List:(Need to be assembled by you) Parts Quantity Parts Quantity Aluminum Stick 5 M6x15 Inner-hexagon Screws 12 Acrylic Board 9 M5x10 Inner-hexagon Screws 8 Stepper Motor 3 M5x10 Inner-hexagon Screws 8 Motor Drum in-phase 3 M5x30 Inner-hexagon Screws 10 Laser Module 1 M5x50 Inner-hexagon Screws 5 Corner Fitting 4 M3x16 Inner-hexagon Screws 4 Driver Board 1 M3x12 Inner-hexagon Screws 14 Synchronous Belt 1 M3x12 Module Fitting Screws 4 12V Power Adapter 1 M5x10 Nylon Column 20 USB Data Cable 1 M3x4 Nylon Column 4 Goggles 1 M3 Screw Nuts 4 Bobbin 1 M5 Spacer 10 Motor Cable 3 M5 Screw Nuts 35 Cable Slot 2 POM Bearing Wheel 15 Belt Clip 6 Parts Box 1 Spanner 4 Tips: The laser machine Instruction & Software downloading link is: Click here Note: 1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. This is a whole assemble set and needs to assemble by your own. 3. Please note that the laser module should work less than half an hour in one time, and then continue to work after cooling down. 4. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. FAQ1: Q:Does this machine need to be assembled when I received it? A:There is a set of laser machine parts that needs you to assemble by yourselves, but we have introduction video to show you how to assemble it, it is very intersting, and rich information, practical skill then you will get from the DIY. Q:Whick type computer system can run its software? A:The software only support the Windows system. Q:If I received the product but it is broken during the tranportation, What can I do? A:Please contact with us([email protected]) we will send you the replacement parts for free. By the way, if you have any questions during the usage, please feel free to contact us, we will help you to solve your problem ASAP. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic. Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. Q:If the laser module is broken during usage, Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:1600mW) on our website,then you can get the information about it and chose to buy one. Q:What's the size of this machine's engraving area? A:The machine's largest engraving area is 22X17cm. Q:What material can it engrave? A:wood,bamboo,plastic,paper,leather,rubber Q:What material can it cut? A:foam,paper,thin fabri,thin balsa wood. Q:Can I use it to cut or engrave on metal? A:It can not engrave or cut on any metal. Q:Can I regulate the laser power or the laser power is adjustable? A:Sorry that the laser power is not adjustable, but the engraving speed is adjustable. Q:How long can the machine work continuously? A:It can work continuously about 60 minutes, after the laser module cool down(about half of an hour) then start work again. Long time work continuously with shorten the laser module lifetime. Q:Can I upgrade the stronger power laser module by myself? A:Of course you can, this machine provide the DC 12V power supply for laser module. So any 12V power supply laser module can be installled on this machine. But you need to connect the laser cable with the right polarity, the red is positive, otherwise the laser mdoule will burn down. Q:Can I extend the slide rail to expand its engraving area? A:Yes, you can. But you need to find the the slide rail by yourself, we do not provide such extended slide rail. Q:When I receive it, how to let it work? A:Fist of all, you need to plug the stepper moter power cable to the controller board, then installl the software and the driver, power supply the machine,that's all. Q:If the laser module is broken during usage,Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:1600mW) on our website,then you can will find it. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic.Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. FAQ 2 Q:Why the machine can't connect with PC? A:Please check if the drive was installed. A:If the port is matched. A:If the USB cable is connected. Q:why the machine can't run? A:Please check if the power is connected. A:If the switch of power is pressed. A:If the LED light of power on board is light. A:If the machine is connected with PC. A:If the machine frame(like wheel, motor and belt) is assembled correctly. A:If the connector of motor is connected with board. Q:Why the laser can't work. A:Please check if the power is connected. A:If the switch of power is pressed. A:If the machine can work but laser can't work, please connected the laser with 12V DC power directly, if the fan can work but no light, the laser was burned out.You can contact with us for warranty.

$469.9

In stock

Specifications: Brand NEJE Model JZ-6 Input voltage 4.2V-5.5V Input Current 1A Laser Power Red Laser 250mw Laser wavelength 405nm Laser Operating temperature 300 degrees Work Area 38*38mm Size 17.6*13.5*13.2cm Image Size 512x512 pixels Image format jpg Image engraving pattern Bitmap engraving Power mode Dual USB powered Support software Laser_Carver (in the 1Gb TF Card) Support system XP, Win7, Win8, Win10 Application: - Can be carved items included: Hard wood, plastic, bamboo, rubber, leather and so on. - Can NOT engrave Metal/Aluminum/Acrylic. Note: The Engraving Machine is assembled well before sending out to you, thank you. Package includes: 1 x Engraving Machine (Assembled Well) 1 x Laser Protective Glasses 1 x Allen wrench 1 x Power Cable 1 x Data Cable 1 x 1Gb TF Card 1 x User's manual More Details:

$75.9

In stock

Specifications: Material Hard Aluminum + Brass Operating Voltage DC 12V Wavelength 445-450nm (Blu-ray) Output Power pulse 15W average 8W Modulation frequency TTL can be modulated (Only with the dedicated driver board can modulate TTL) Working Current <3A Focal length 16mm( can not be adjusted) Operating temperature 15 C ~ 45 C Size 10 x 6 x 4.8cm Usage Carving stainless steel, iron, anodized aluminum, ceramics, stone, wood, bamboo, leather, plastics, etc. Features: *Made of high quality hard aluminum and brass material, the surface is by anodized and sandblasting ,not easy rust,very durable. *One of the most powerful diodes available, upgrade your Wood engraver to a Metal Marking Machine. *It can mark metal and stone, cut wood, foam and other materials easily. *With heat dissipation fan,make it with longer service life. Note: - Please wear the protective glass when you use the laser module. - Do not touch the laser light directly in case that hurt the body and skin. - Keep children and pets away from the laser module when it working. Package Includes: 1 x Laser Head 1 x Adapter plate 3 x Plastic column More Details:

$299.9

In stock

Description: The Reflector is an important component in the optical path system of laser processing, and the light can be refracted by the mirror according to the predetermined line and direction. Specifications: Material: Metallic Molybdenum Diameter: 25mm Edge Thickness: 3mm Wave Length: 10.6um Reflectivity (=10.6m)98% Features: - High reflectivity - Resistance to wipe - Adapt to work under harsh environment - Molybdenum mirror is normally polished, without coating, used for tough environments. it has extremely tough surface. - This optical element is used for planar reflecting the laser beam and is an important component of the laser system. - Fits 40W to 150W cutters engravers,it has countless applications, such as Astronomy, Industry, Medicine, Optical Communication, etc... Package Included: 3 x Molybdenum Laser Reflecting Mirror More Details:

$14.98

In stock

61 - 90 of 101 items