Laser Equipment

There are 101 products

  • Sort By

Description: EleksMaker LA03-1600 DC 12V 445nm 1600mW Blue Laser Module With Heatsink is for DIY Laser Engraver Machine. Specification: Brand EleksMaker Model LA03-1600 Heatsink Material aircraft aluminum Output Power 1600mW(1.6W) Wavelength 445nm(blue laser) Voltage DC 12V Current 1A~1.5A Beam Shape dot(focusable) Life Time 8,000 hours Working Temperature -40-75 Feature: 1. 445nm 1.6W focusable blue laser module 2. DC 5.5*2.1 power port 3. Aircraft aluminum heatsink with cooling fan ensure long working time continuously 4. Equipped with constant-current driver board ensure stable output optical power,low heat no external driver board needed,easy to use 5. Suitable for industrial laser engraving machine equipment usage Engraving Material Note: 1. Can engrave materials: wood, bamboo, plastic, paper, leather, bank card, rubber 2. Can not engrave material: Metal,stone, ceramic, shell, light-reflecting material, transparent material Note: 1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. Please note that the laser module should work for less than half an hour in one time. And then continue to work after cooling down to ensure the period of use. 3. We will send you a plug adapter according to your country. 4. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. Package included: 1X 1.6W Focusable Blue Laser Module 1X Power Adapter 1X Plug Adapter

$65.9

In stock

12V TTL 200mW To 2W 445nm 450nm Laser Diode LD Power Supply Driver Board Description: Input Voltage:DC 8-14V Max. Output Voltage:DC12V (adjustable) Max.Output Current:3A (adjustable) Complicable Laser Diode:200mW-2W 405/445/450/520nm (Red, Green and Blue Laser Drive Power) Dimensions: 33 x 48mm (W x L) Component Height: 13mm (including power board) Feature: Laser Diode LD Power Supply Driver Board. For Red, Green and Blue Laser Drive Power. For the laser driver, it can be used for various types of Reduced voltage constant current source. AC / DC can be used, regardless of positive and negative input to improve the non-professional user convenience. Widely used in a variety of stage laser light with TTL modulation, can work long hours. Note: Recently we have upgraded the before ones, the differences will show in the pictures, the specifications updated in Description. Please pay attention to them. Thank you:) Package included: 1X Laser Diode Power Supply Driver Board

$9.47

In stock

Desktop DIY Laser Engraver Cutter Engraving Machine Assemble Kit 17X20cm Video Show: Description: Brand: EleksMaker Model: EleksLaser-A5 Pro Material:aluminum+acrylic Engraving Arear:17X20cm Assembled Size:38X31X25cm/14.96X12.20X9.84inch(L*W*H) Software: The laser machine Instruction & Software downloading link is: Click here Feature: 1. Desktop laser engraver assembling kit 2. 17X20cm engraving area 3. Three stepper motor drive providing faster moving speed 4. Individual power switch design, easy to control the machine run or stop during working 5. Gantry type design,no engraving height limitation 6. Equipped with separated power switch, easy to control Note: 1. Please wear laser goggles during usage, avoid to touch the laser directly to the eyes and skin. 2. This is a assemble set without laser module, it needs you to assemble it. 4. Note that the laser module works less than half an hour in one time, and please when it cool down and continue to work. Package included: 1X Circuit Board 1X Power Adapter 1X Screws Set 2X Linear Guide 3X Stepper Motor Controlling software(Grbl and Benbox) FAQ: Q:Does this machine need to be assembled when I received it? A:It is not assebled and need you to finish this steps and assemble it. We have the assembleed kit<<click here>> please search it on our website. Q:Are there software and instructions can I get it? A:Yes we have the software and instructions and we have we upload it to the netdisk, the downloading link is <<click here>> Q:Whick type computer system can run its software? A:The software only support the Windows system. Q:If I received the product but it is broken during the transportation,What can do? A:Please contact with us([email protected]) we wil send you the replacemt parts for free.By the way, if you have any questions during the usage, please feel free to contact us, we will help you to solve your problem ASAP. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic.Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. Q:If the laser module is broken during usage,Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:500mW) on our website,then you can will find it. Q:Wht's the size of this machine's engraving area? A:The machine's largest engraving area is 17X20cm. Q:What material can it engrave? A:wood,bamboo,plastic,paper,leather,rubber Q:What material can it cut? A:foam,paper,thin leather Q:Can I use it to cut or engrave on metal? A:It can not engrave or cut on any metal. Q:Can I regulate the laser power or the laser power is adjustable? A:Sorry that the laser power is not adjustable,but the engraving speed is adjustable. Q:How long can the machine work continuously? A:It can work continuously about 45 minutes, after the laser mould cool down(about half of an hour) then start work again. Long time work continuously with shorten the laser module liftetime. Q:Can I upgrade the stronger power laser module by myself? A:Of course you can, this machine provide the DC 5V power supply for laser module. So any 5V power supply laser module can be installled on this machine. But you need to connect the laser cable with the right polarity, the red is positive, otherwise the laser mdoule will burn down. Q:Can I extend the slide rail to expand its engraving area? A:Yes, you can. But you need to find the the slide rail by yourself, we do not provide such extended slide rail. Q:When I receive it, how to do to let it work? A:Fist of all, you need to plug the stepper moter power cable to the controller board( then installl the software and the driver, power supply the machine,that's all.

$159.7

In stock

4 Pin Dupont Line Wire Cable For DIY Laser Engraver Engraving Machine 200mm Description: Type:4 pin Wire Size:200X1.3mm(L*D) Feature: Single 4 pin termianl wire harness Fit for DIY laser engraving machine Package inlcuded: 1X Single 4 Pin Terminal Wire Harness

$0.79

In stock

Introduction: Get a green laser sight, and hit your target every time. This green laser sight easily attaches to your pistol or handgun with the included mount. In no time, you'll be shooting more accurately and more confidently Plus, you'll be hitting meaningful targets, like bears and ducks and manly things, as opposed to the pretty little flowers that just happened to be in the way of your poorly aimed shot. Specifications: Wavelength: 532NM Wattage: 5mw Voltage: 3V Reaching Distance: 300m Power Supply: CR123AW battery Body Length: Appeox. 12cm/ 4.72" Laser Tube Diameter: Approx. 2.54cm/ 1" Height: Approx. 3.6cm/ 1.42" Features: Windage and elevation can be adjusted with included wrenches Prop up the scope using only a 20mm weaver mount or an 8 shaped 1" barrel mount Provide clear pointing dot even in day light and clear laser beam in the dark or low light The unit also includes an interchangeable switch which allows the user to press the unit to turn on or to use an attached remote to turn on the scope. Package Included: 1 x Green Dot Laser Sight Scope 1 x Adapter Tail 2 x Mounts 1 x Hex Wrench 1 x User Manual

$19.99

In stock

EleksMaker LA03-2500 445nm 2500mW Blue Laser Module With Heatsink For DIY Laser Engraver Machine. Description: Brand EleksMaker Model LA03-2500 Heatsink Material aircraft aluminum Output Power 2500mW(2.5W) Wavelength 445nm(blue laser) Voltage DC 12V Current 1.3A Beam Shape dot(focusable) Life Time >10,000 hours Working Temperature -40-75 Feature: 1. 445nm 2.5W focusable blue laser module 2. DC 5.5*2.1 power port 3. Aircraft aluminum heatsink with cooling fan ensure long working time continuously 4. Equipped with constant-current driver board ensure stable output optical power,low heat no external driver board needed,easy to use 4. Suitable for industrial laser engraving machine equipment usage Note: 1. Please wear laser goggles when you using it. 2. We will send you a plug adapter according to your country. 3. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. Package included: 1X 2.5W Focusable Blue Laser Module 1X Power Adapter 1X Plug Adapter

$56.99

In stock

445nm 5.5W 5500mW Blue Laser Module With Heatsink For DIY Laser Cutter Engraver Description: Brand EleksMaker Model LA03-5500 Heatsink Material aircraft aluminum Output Power 5500mW(5.5W) Wavelength 445nm(blue laser) Voltage DC 12V Current 3A Beam Shape dot(focusable) Life Time >10,000 hours Working Temperature -40-75 Feature: 445nm 5.5W focusable blue laser module DC 5.5*2.1 power port Aircraft aluminum heatsink with cooling fan ensure long working time continuously Equipped with constant-current driver board ensure stable output optical power,low heat no external driver board needed,easy to use Suitable for industrial laser engraving machine equipment usage Note: 1. Please wear laser goggles during usage, avoid to touch the laser directly to the eyes and skin. 2. Note that the laser module works less than half an hour in one time, and please when it cool down and continue to work. 3. We will send you a plug adapter according to your country. 4. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. Package included: 1X 5.5W Focusable Blue Laser Module 1X Power Adapter 1X Plug Adapter More Details:

$199.99

In stock

How to assemble the EleksLaser-A5 Pro 500mW laser engraving machine: How cool the machine can it be : DIY Projects Show with EleksLaser: Specifications: Brand EleksMaker Model EleksLaser-A5 pro 500mW Material Stainless Steel and Acrylic Working Voltage DC 12V Working Current DC 2.5A Laser Power 500mW Control Software System Advanced Edition(GRBL)/ Simple version(Benbox) Engraving Accuracy 0.01mm Engraving Area 22x17cm / 8.66 x 6.69inch (maximum) Engraved object height limitatiion No Limitation Packaging Size 35x25X15cm / 13.78x9.84x5.91inch (L*W*H) Package Weight 4.60kg Certification CE, FCC, FDA(Please contact us if you need them) Function ideal for amateur laser engraving usage low-light positioning and freedom positioning functions. Features 22x17cm ultra large engraving area,gantry shape design, no engraving height limitation. Three stepper motor drive providing faster moving speed. 500mW violet laser module with heatsink, high laser engraving power and long-term available. can print any pictures easily Package List:(Need to be built up by yourself) Parts Quantity Parts Quantity Aluminum Stick 5 M6x15 Inner-hexagon Screws 12 Acrylic Board 9 M5x10 Inner-hexagon Screws 8 Stepper Motor 3 M5x10 Inner-hexagon Screws 8 Motor Drum in-phase 3 M5x30 Inner-hexagon Screws 10 Laser Module 1 M5x50 Inner-hexagon Screws 5 Corner Fitting 4 M3x16 Inner-hexagon Screws 4 Driver Board 1 M3x12 Inner-hexagon Screws 14 Synchronous Belt 1 M3x12 Module Fitting Screws 4 12V Power Adapter 1 M5x10 Nylon Column 20 USB Data Cable 1 M3x4 Nylon Column 4 Goggles 1 M3 Screw Nuts 4 Bobbin 1 M5 Spacer 10 Motor Cable 3 M5 Screw Nuts 35 Cable Slot 2 POM Bearing Wheel 15 Belt Clip 6 Parts Box 1 Spanner 4 Tips: The New updated software download link (2017.01): Click Here The laser machine benbox Instruction downloading link is: Click Here The laser machine benbox & GRBL software downloading link is: Click Here Note: 1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. This is a whole assemble set and needs to assemble by your own. 3. Please note that the laser module should work less than half an hour in one time, and then continue to work after cooling down. 4. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. CE & FCC Certification: FAQ1: Q:Does this machine need to be assembled when I received it? A:There is a set of laser machine parts that needs you to assemble by yourselves, but we have introduction video to show you how to assemble it, it is very intersting, and rich information, practical skill then you will get from the DIY. Q:Whick type computer system can run its software? A:The software only support the Windows system. Q:If I received the product but it is broken during the tranportation, What can I do? A:Please contact with us([email protected]) we will send you the replacement parts for free. By the way, if you have any questions during the usage, please feel free to contact us, we will help you to solve your problem ASAP. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic. Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. Q:If the laser module is broken during usage, Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:1600mW) on our website,then you can get the information about it and chose to buy one. Q:What's the size of this machine's engraving area? A:The machine's largest engraving area is 22X17cm. Q:What material can it engrave? A:wood,bamboo,plastic,paper,leather,rubber Q:What material can it cut? A:foam,paper,thin fabri,thin balsa wood. Q:Can I use it to cut or engrave on metal? A:It can not engrave or cut on any metal. Q:Can I regulate the laser power or the laser power is adjustable? A:Sorry that the laser power is not adjustable, but the engraving speed is adjustable. Q:How long can the machine work continuously? A:It can work continuously about 60 minutes, after the laser module cool down(about half of an hour) then start work again. Long time work continuously with shorten the laser module lifetime. Q:Can I upgrade the stronger power laser module by myself? A:Of course you can, this machine provide the DC 12V power supply for laser module. So any 12V power supply laser module can be installled on this machine. But you need to connect the laser cable with the right polarity, the red is positive, otherwise the laser mdoule will burn down. Q:Can I extend the slide rail to expand its engraving area? A:Yes, you can. But you need to find the the slide rail by yourself, we do not provide such extended slide rail. Q:When I receive it, how to let it work? A:Fist of all, you need to plug the stepper moter power cable to the controller board, then installl the software and the driver, power supply the machine,that's all. Q:If the laser module is broken during usage,Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:1600mW) on our website,then you can will find it. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic.Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. FAQ 2: Q:Why the machine can't connect with PC? A:Please check if the drive was installed. A:If the port is matched. A:If the USB cable is connected. Q:why the machine can't run? A:Please check if the power is connected. A:If the switch of power is pressed. A:If the LED light of power on board is light. A:If the machine is connected with PC. A:If the machine frame(like wheel, motor and belt) is assembled correctly. A:If the connector of motor is connected with board. Q:Why the laser can't work. A:Please check if the power is connected. A:If the switch of power is pressed. A:If the machine can work but laser can't work, please connected the laser with 12V DC power directly, if the fan can work but no light, the laser was burned out.You can contact with us for warranty.

$195.5

In stock

20mm Diameter ZnSe Focus Lens For CO2 Laser Engraver FL 1/1.5/2/2.5/3/4 Inch Description: Material:ZnSe Diameter:20mm/0.71" Thickness:2mm/0.08" Focal Length:25.4mm/1" 38.1mm/1.5" 50.8mm/2" 63.5mm/2.5" 76.2mm/3" 101.6mm/4" Wave Length:10.6um Quantity:1pcs Feature: 20mm diameter ZnSe focus lens 1" to 4" focal length can be selected High transmittance and high temperature tolerance with ZnSe material Ideal for CO2 laser engraver and stamp marker usage Package included: 1X 20mm Diameter ZnSe Focus Lens

$19.99

In stock

How to assemble the EleksLaser-A5 Pro 1.6W laser engraving machine: How cool the machine can it be : DIY Projects Show with EleksLaser: Specifications: Brand EleksMaker Model EleksLaser-A5 pro 1.6W Material Stainless Steel and Acrylic Working Voltage DC 12V Working Current DC 2.5A Laser Power 1.6W / 1600mW Control Software System Advanced Edition(GRBL)/ Simple version(Benbox) Engraving Accuracy 0.01mm Engraving Area 22x17cm / 8.66 x 6.69inch (maximum) Engraved object height limitatiion No Limitation Packaging Size 35x25X15cm / 13.78x9.84x5.91inch (L*W*H) Package Weight 4.60kg Certification CE, FCC, FDA(Please contact us if you need them) Function ideal for amateur laser engraving usage low-light positioning and freedom positioning functions. Features 22x17cm ultra large engraving area,gantry shape design, no engraving height limitation. Three stepper motor drive providing faster moving speed. 1600mW violet laser module with heatsink, high laser engraving power and long-term available. can print any pictures easily Package List:(Need to be built up by yourself) Parts Quantity Parts Quantity Aluminum Stick 5 M6x15 Inner-hexagon Screws 12 Acrylic Board 9 M5x10 Inner-hexagon Screws 8 Stepper Motor 3 M5x10 Inner-hexagon Screws 8 Motor Drum in-phase 3 M5x30 Inner-hexagon Screws 10 Laser Module 1 M5x50 Inner-hexagon Screws 5 Corner Fitting 4 M3x16 Inner-hexagon Screws 4 Driver Board 1 M3x12 Inner-hexagon Screws 14 Synchronous Belt 1 M3x12 Module Fitting Screws 4 12V Power Adapter 1 M5x10 Nylon Column 20 USB Data Cable 1 M3x4 Nylon Column 4 Goggles 1 M3 Screw Nuts 4 Bobbin 1 M5 Spacer 10 Motor Cable 3 M5 Screw Nuts 35 Cable Slot 2 POM Bearing Wheel 15 Belt Clip 6 Parts Box 1 Spanner 4 Tips: The laser machine Instruction & Software downloading link is: Click here Note: 1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. This is a whole assemble set and needs to assemble by your own. 3. Please note that the laser module should work less than half an hour in one time, and then continue to work after cooling down. 4. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. CE & FCC Certification: FAQ1: Q:Does this machine need to be assembled when I received it? A:There is a set of laser machine parts that needs you to assemble by yourselves, but we have introduction video to show you how to assemble it, it is very intersting, and rich information, practical skill then you will get from the DIY. Q:Whick type computer system can run its software? A:The software only support the Windows system. Q:If I received the product but it is broken during the tranportation, What can I do? A:Please contact with us([email protected]) we will send you the replacement parts for free. By the way, if you have any questions during the usage, please feel free to contact us, we will help you to solve your problem ASAP. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic. Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. Q:If the laser module is broken during usage, Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:1600mW) on our website,then you can get the information about it and chose to buy one. Q:What's the size of this machine's engraving area? A:The machine's largest engraving area is 22X17cm. Q:What material can it engrave? A:wood,bamboo,plastic,paper,leather,rubber Q:What material can it cut? A:foam,paper,thin fabri,thin balsa wood. Q:Can I use it to cut or engrave on metal? A:It can not engrave or cut on any metal. Q:Can I regulate the laser power or the laser power is adjustable? A:Sorry that the laser power is not adjustable, but the engraving speed is adjustable. Q:How long can the machine work continuously? A:It can work continuously about 60 minutes, after the laser module cool down(about half of an hour) then start work again. Long time work continuously with shorten the laser module lifetime. Q:Can I upgrade the stronger power laser module by myself? A:Of course you can, this machine provide the DC 12V power supply for laser module. So any 12V power supply laser module can be installled on this machine. But you need to connect the laser cable with the right polarity, the red is positive, otherwise the laser mdoule will burn down. Q:Can I extend the slide rail to expand its engraving area? A:Yes, you can. But you need to find the the slide rail by yourself, we do not provide such extended slide rail. Q:When I receive it, how to let it work? A:Fist of all, you need to plug the stepper moter power cable to the controller board, then installl the software and the driver, power supply the machine,that's all. Q:If the laser module is broken during usage,Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:1600mW) on our website,then you can will find it. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic.Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. FAQ 2: Q:Why the machine can't connect with PC? A:Please check if the drive was installed. A:If the port is matched. A:If the USB cable is connected. Q:why the machine can't run? A:Please check if the power is connected. A:If the switch of power is pressed. A:If the LED light of power on board is light. A:If the machine is connected with PC. A:If the machine frame(like wheel, motor and belt) is assembled correctly. A:If the connector of motor is connected with board. Q:Why the laser can't work. A:Please check if the power is connected. A:If the switch of power is pressed. A:If the machine can work but laser can't work, please connected the laser with 12V DC power directly, if the fan can work but no light, the laser was burned out.You can contact with us for warranty.

$199.9

In stock

How to assemble the EleksLaser-A5 Pro 2.5W laser engraving machine: How cool the machine can it be : DIY Projects Show with EleksLaser: Specifications: Brand EleksMaker Model EleksLaser-A5 pro 2.5W Material Stainless Steel and Acrylic Working Voltage DC 12V Working Current DC 2.5A Laser Power 2.5W / 2500mW Control Software System Advanced Edition(GRBL)/ Simple version(Benbox) Engraving Accuracy 0.01mm Engraving Area 22x17cm / 8.66 x 6.69inch (maximum) Engraved object height limitatiion No Limitation Packaging Size 35x25X15cm / 13.78x9.84x5.91inch (L*W*H) Package Weight 4.60kg Certification CE, FCC, FDA(Please contact us if you need them) Function ideal for amateur laser engraving usage low-light positioning and freedom positioning functions. Features 22x17cm ultra large engraving area,gantry shape design, no engraving height limitation. Three stepper motor drive providing faster moving speed. 2500mW violet laser module with heatsink, high laser engraving power and long-term available. can print any pictures easily Package List:(Need to be built up by yourself) Parts Quantity Parts Quantity Aluminum Stick 5 M6x15 Inner-hexagon Screws 12 Acrylic Board 9 M5x10 Inner-hexagon Screws 8 Stepper Motor 3 M5x10 Inner-hexagon Screws 8 Motor Drum in-phase 3 M5x30 Inner-hexagon Screws 10 Laser Module 1 M5x50 Inner-hexagon Screws 5 Corner Fitting 4 M3x16 Inner-hexagon Screws 4 Driver Board 1 M3x12 Inner-hexagon Screws 14 Synchronous Belt 1 M3x12 Module Fitting Screws 4 12V Power Adapter 1 M5x10 Nylon Column 20 USB Data Cable 1 M3x4 Nylon Column 4 Goggles 1 M3 Screw Nuts 4 Bobbin 1 M5 Spacer 10 Motor Cable 3 M5 Screw Nuts 35 Cable Slot 2 POM Bearing Wheel 15 Belt Clip 6 Parts Box 1 Spanner 4 Tips: The laser machine Instruction & Software downloading link is: Click here Note: 1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. This is a whole assemble set and needs to assemble by your own. 3. Please note that the laser module should work less than half an hour in one time, and then continue to work after cooling down. 4. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. CE & FCC Certification: FAQ1: Q:Does this machine need to be assembled when I received it? A:There is a set of laser machine parts that needs you to assemble by yourselves, but we have introduction video to show you how to assemble it, it is very intersting, and rich information, practical skill then you will get from the DIY. Q:Whick type computer system can run its software? A:The software only support the Windows system. Q:If I received the product but it is broken during the tranportation, What can I do? A:Please contact with us([email protected]) we will send you the replacement parts for free. By the way, if you have any questions during the usage, please feel free to contact us, we will help you to solve your problem ASAP. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic. Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. Q:If the laser module is broken during usage, Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:1600mW) on our website,then you can get the information about it and chose to buy one. Q:What's the size of this machine's engraving area? A:The machine's largest engraving area is 22X17cm. Q:What material can it engrave? A:wood,bamboo,plastic,paper,leather,rubber Q:What material can it cut? A:foam,paper,thin fabri,thin balsa wood. Q:Can I use it to cut or engrave on metal? A:It can not engrave or cut on any metal. Q:Can I regulate the laser power or the laser power is adjustable? A:Sorry that the laser power is not adjustable, but the engraving speed is adjustable. Q:How long can the machine work continuously? A:It can work continuously about 60 minutes, after the laser module cool down(about half of an hour) then start work again. Long time work continuously with shorten the laser module lifetime. Q:Can I upgrade the stronger power laser module by myself? A:Of course you can, this machine provide the DC 12V power supply for laser module. So any 12V power supply laser module can be installled on this machine. But you need to connect the laser cable with the right polarity, the red is positive, otherwise the laser mdoule will burn down. Q:Can I extend the slide rail to expand its engraving area? A:Yes, you can. But you need to find the the slide rail by yourself, we do not provide such extended slide rail. Q:When I receive it, how to let it work? A:Fist of all, you need to plug the stepper moter power cable to the controller board, then installl the software and the driver, power supply the machine,that's all. Q:If the laser module is broken during usage,Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:1600mW) on our website,then you can will find it. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic.Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. FAQ 2: Q:Why the machine can't connect with PC? A:Please check if the drive was installed. A:If the port is matched. A:If the USB cable is connected. Q:why the machine can't run? A:Please check if the power is connected. A:If the switch of power is pressed. A:If the LED light of power on board is light. A:If the machine is connected with PC. A:If the machine frame(like wheel, motor and belt) is assembled correctly. A:If the connector of motor is connected with board. Q:Why the laser can't work. A:Please check if the power is connected. A:If the switch of power is pressed. A:If the machine can work but laser can't work, please connected the laser with 12V DC power directly, if the fan can work but no light, the laser was burned out.You can contact with us for warranty.

$199.9

In stock

EleksLaser A3 1600mW Desktop DIY Violet Laser Engraver Cutter: How to Assemble The Laser Machine: How cool the laser machine it can be. (Taking 1.6W A5 laser machine as example.) DIY Projects Show with EleksLaser: Specifications: Brand EleksMaker Model EleksLaser-A3 pro 1.6W Material Stainless Steel and Acrylic Working Voltage DC 12V Working Current DC 2.5A Laser Power 1.6W / 1600mW Control Software System Advanced Edition(GRBL)/ Simple version(Benbox) Engraving Accuracy 0.01mm Engraving Area 30x40cm / 11.81 x 15.75inch (maximum) Engraved object height limitatiion No Limitation Packaging Size 58x40x14cm / 22.83x15.75x5.51inch (L*W*H) Assembled Product Size 60x46x18cm / 23.62x18.11x7.09inch (L*W*H) Package Weight 4.60kg Certification CE, FCC, FDA(Please contact us if you need them) Function ideal for amateur laser engraving usage low-light positioning and freedom positioning functions. Features 30X40cm ultra large engraving area,gantry shape design, no engraving height limitation. Three stepper motor drive providing faster moving speed. 1600mW violet laser module with heatsink, high laser engraving power and long-term available. can print any pictures easily Package List:(Need to assemble by your own) Parts Quantity Parts Quantity Aluminum Stick 5 M6x15 Inner-hexagon Screws 12 Acrylic Board 9 M5x10 Inner-hexagon Screws 8 Stepper Motor 3 M5x10 Inner-hexagon Screws 8 Motor Drum in-phase 3 M5x30 Inner-hexagon Screws 10 Laser Module 1 M5x50 Inner-hexagon Screws 5 Corner Fitting 4 M3x16 Inner-hexagon Screws 4 Driver Board 1 M3x12 Inner-hexagon Screws 14 Synchronous Belt 1 M3x12 Module Fitting Screws 4 12V Power Adapter 1 M5x10 Nylon Column 20 USB Data Cable 1 M3x4 Nylon Column 4 Goggles 1 M3 Screw Nuts 4 Bobbin 1 M5 Spacer 10 Motor Cable 3 M5 Screw Nuts 35 Cable Slot 2 POM Bearing Wheel 15 Belt Clip 6 Parts Box 1 Spanner 4 Tips: The laser machine Instruction & Software downloading link is: Click here Note: 1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. This is a whole assemble set and needs to assemble by your own. 3. Please note that the laser module should work less than half an hour in one time, and then continue to work after cooling down. 4. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. FAQ: Q:Does this machine need to be assembled when I received it? A:There is a set of A3 laser machine parts that needs you to assemble by yourselves, but we have introduction video to show you how to assemble it, it is very intersting, and rich information, practical skill then you will get from the DIY. Q:Whick type computer system can run its software? A:The software only support the Windows system. Q:If I received the product but it is broken during the tranportation, What can I do? A:Please contact with us([email protected]) we will send you the replacement parts for free. By the way, if you have any questions during the usage, please feel free to contact us, we will help you to solve your problem ASAP. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic. Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. Q:If the laser module is broken during usage, Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:2500MW,5500mW) on our website,then you can get the information about it and chose to buy one. Q:What's the size of this machine's engraving area? A:The machine's largest engraving area is 30X40cm. Q:What material can it engrave? A:Wood, bamboo, plastic, paper, leather, rubber. Q:What material can it cut? A:Foam, paper, thin leather. Q:Can I use it to cut or engrave on metal? A:It can not engrave or cut on any metal. Q:Can I regulate the laser power or the laser power is adjustable? A:Sorry that the laser power is not adjustable, but the engraving speed is adjustable. Q:How long can the machine work continuously? A:It can work continuously about 1~2 hours, after the laser mould cool down(about half of an hour) then start work again. Long time work continuously with shorten the laser module liftetime. Q:Can I upgrade the stronger power laser module by myself? A:Of course you can, this machine provide the DC 12V power supply for laser module. So any 12V power supply laser module can be installled on this machine. But you need to connect the laser cable with the right polarity, the red is positive, otherwise the laser mdoule will burn down. Q:Can I extend the slide rail to expand its engraving area? A:Yes, you can. But you need to find the the slide rail by yourself, we do not provide such extended slide rail. Q:When I receive it, how to let it work? A:Fist of all, you need to plug the stepper moter power cable to the controller board, then installl the software and the driver, power supply the machine,that's all. Q:What format of the pictures can Benbox support? A: It can support jpg /png /bmp /dxf etc. Q: If the engraving result is bigger than we set in GRBL, what should we do? A: Please check the $0,$1 and $2, and set them to 80 (Eighty). FDA Certificate:

$219.9

In stock

EleksLaser A3 2500mW Desktop DIY Violet Laser Engraver Cutter: How to Assemble The Laser Machine (Old Version,some parts have been changed): How to Assemble The Laser Machine (New Version): How cool the laser machine it can be. (Taking 1.6W A5 laser machine as example.) DIY Projects Show with EleksLaser: Specifications: Brand EleksMaker Model EleksLaser-A3 pro 2.5W Material Stainless Steel and Acrylic Working Voltage DC 12V Working Current DC 2.5A Laser Power 2.5W / 2500mW Control Software System Advanced Edition(GRBL)/ Simple version(Benbox) Engraving Accuracy 0.01mm Engraving Area 30x40cm / 11.81 x 15.75inch (maximum) Engraved object height limitatiion No Limitation Packaging Size 58x40x14cm / 22.83x15.75x5.51inch (L*W*H) Assembled Product Size 60x46x18cm / 23.62x18.11x7.09inch (L*W*H) Package Weight 4.60kg Certification CE, FCC, FDA(Please contact us if you need them) Function ideal for amateur laser engraving usage low-light positioning and freedom positioning functions. Features 30X40cm ultra large engraving area,gantry shape design, no engraving height limitation. Three stepper motor drive providing faster moving speed. 2500mW violet laser module with heatsink, high laser engraving power and long-term available. can print any pictures easily Package List: Parts Quantity Parts Quantity Aluminum Stick 5 M6x15 Inner-hexagon Screws 12 Acrylic Board 9 M5x10 Inner-hexagon Screws 8 Stepper Motor 3 M5x10 Inner-hexagon Screws 8 Motor Drum in-phase 3 M5x30 Inner-hexagon Screws 10 Laser Module 1 M5x50 Inner-hexagon Screws 5 Corner Fitting 4 M3x16 Inner-hexagon Screws 4 Driver Board 1 M3x12 Inner-hexagon Screws 14 Synchronous Belt 1 M3x12 Module Fitting Screws 4 12V Power Adapter 1 M5x10 Nylon Column 20 USB Data Cable 1 M3x4 Nylon Column 4 Goggles 1 M3 Screw Nuts 4 Bobbin 1 M5 Spacer 10 Motor Cable 3 M5 Screw Nuts 35 Cable Slot 2 POM Bearing Wheel 15 Belt Clip 6 Parts Box 1 Spanner 4 Tips: The New Instruction and software download link is here: Click Here The laser machine benbox Instruction downloading link is: Click Here Note: 1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. This is a whole assemble set and needs to assemble by your own. 3. Please note that the laser module should work less than half an hour in one time, and then continue to work after cooling down. 4. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. FAQ: Q:Does this machine need to be assembled when I received it? A:There is a set of A3 laser machine parts that needs you to assemble by yourselves, but we have introduction video to show you how to assemble it, it is very intersting, and rich information, practical skill then you will get from the DIY. Q:Whick type computer system can run its software? A:The software only support the Windows system. Q:If I received the product but it is broken during the tranportation, What can I do? A:Please contact with us([email protected]) we will send you the replacement parts for free. By the way, if you have any questions during the usage, please feel free to contact us, we will help you to solve your problem ASAP. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic. Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. Q:If the laser module is broken during usage, Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:5500mW) on our website,then you can get the information about it and chose to buy one. Q:What's the size of this machine's engraving area? A:The machine's largest engraving area is 30X40cm. Q:What material can it engrave? A:Wood, bamboo, plastic, paper, leather, rubber. Q:What material can it cut? A:Foam, paper, thin leather. Q:Can I use it to cut or engrave on metal? A:It can not engrave or cut on any metal. Q:Can I regulate the laser power or the laser power is adjustable? A:Sorry that the laser power is not adjustable, but the engraving speed is adjustable. Q:How long can the machine work continuously? A:It can work continuously about 1~2 hours, after the laser mould cool down(about half of an hour) then start work again. Long time work continuously with shorten the laser module liftetime. Q:Can I upgrade the stronger power laser module by myself? A:Of course you can, this machine provide the DC 12V power supply for laser module. So any 12V power supply laser module can be installled on this machine. But you need to connect the laser cable with the right polarity, the red is positive, otherwise the laser mdoule will burn down. Q:Can I extend the slide rail to expand its engraving area? A:Yes, you can. But you need to find the the slide rail by yourself, we do not provide such extended slide rail. Q:When I receive it, how to let it work? A:Fist of all, you need to plug the stepper moter power cable to the controller board, then installl the software and the driver, power supply the machine,that's all. Q:What format of the pictures can Benbox support? A: It can support jpg /png /bmp /dxf etc. Q: If the engraving result is bigger than we set in GRBL, what should we do? A: Please check the $0,$1 and $2, and set them to 80 (Eighty).

$219.9

In stock

Description: EleksLaser A3 5500mW Desktop DIY Violet Laser Engraver Cutter: How to Assemble The Laser Machine: How cool the laser machine it can be. (Taking 1.6W A5 laser machine as example.) DIY Projects Show with EleksLaser: Specifications: Brand EleksMaker Model EleksLaser-A3 pro 5.5W Material Stainless Steel and Acrylic Working Voltage DC 12V Working Current DC 2.5A Laser Power 5.5W / 5500mW Control Software System Advanced Edition(GRBL)/ Simple version(Benbox) Engraving Accuracy 0.01mm Engraving Area 30x40cm / 11.81 x 15.75inch (maximum) Engraved object height limitatiion No Limitation Packaging Size 58x40x14cm / 22.83x15.75x5.51inch (L*W*H) Assembled Product Size 60x46x18cm / 23.62x18.11x7.09inch (L*W*H) Package Weight 4.60kg Certification CE, FCC, FDA(Please contact us if you need them) Function ideal for amateur laser engraving usage low-light positioning and freedom positioning functions. Features 30X40cm ultra large engraving area,gantry shape design, no engraving height limitation. Three stepper motor drive providing faster moving speed. 5500mW violet laser module with heatsink, high laser engraving power and long-term available. can print any pictures easily Package List: Parts Quantity Parts Quantity Aluminum Stick 5 M6x15 Inner-hexagon Screws 12 Acrylic Board 9 M5x10 Inner-hexagon Screws 8 Stepper Motor 3 M5x10 Inner-hexagon Screws 8 Motor Drum in-phase 3 M5x30 Inner-hexagon Screws 10 Laser Module 1 M5x50 Inner-hexagon Screws 5 Corner Fitting 4 M3x16 Inner-hexagon Screws 4 Driver Board 1 M3x12 Inner-hexagon Screws 14 Synchronous Belt 1 M3x12 Module Fitting Screws 4 12V Power Adapter 1 M5x10 Nylon Column 20 USB Data Cable 1 M3x4 Nylon Column 4 Goggles 1 M3 Screw Nuts 4 Bobbin 1 M5 Spacer 10 Motor Cable 3 M5 Screw Nuts 35 Cable Slot 2 POM Bearing Wheel 15 Belt Clip 6 Parts Box 1 Spanner 4 Tips: ElekCAM software download and Instruction link is here: Click Here Benbox Sottware should be updated according to this: Click Here Note: 1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. This is a whole assemble set and needs to assemble by your own. 3. Please note that the laser module should work less than half an hour in one time, and then continue to work after cooling down. 4. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage ) please feel free to ask our customer service for a help. Thank you. CE & FCC Certification: FAQ: Q:Does this machine need to be assembled when I received it? A:There is a set of A3 laser machine parts that needs you to assemble by yourselves, but we have introduction video to show you how to assemble it, it is very intersting, and rich information, practical skill then you will get from the DIY. Q:Whick type computer system can run its software? A:The software only support the Windows system. Q:If I received the product but it is broken during the tranportation, What can I do? A:Please contact with us([email protected]) we will send you the replacement parts for free. By the way, if you have any questions during the usage, please feel free to contact us, we will help you to solve your problem ASAP. Q:What's the machine's lifetime? A:The machine is made from the aluminum alloy and acrylic. Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. Q:If the laser module is broken during usage, Where can I get the replacement one? A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:5500mW) on our website,then you can get the information about it and chose to buy one. Q:What's the size of this machine's engraving area? A:The machine's largest engraving area is 30X40cm. Q:What material can it engrave? A:Wood, bamboo, plastic, paper, leather, rubber. Q:What material can it cut? A:Foam, paper, thin leather. Q:Can I use it to cut or engrave on metal? A:It can not engrave or cut on any metal. Q:Can I regulate the laser power or the laser power is adjustable? A:Sorry that the laser power is not adjustable, but the engraving speed is adjustable. Q:How long can the machine work continuously? A:It can work continuously about 1~2 hours, after the laser mould cool down(about half of an hour) then start work again. Long time work continuously with shorten the laser module liftetime. Q:Can I upgrade the stronger power laser module by myself? A:Of course you can, this machine provide the DC 12V power supply for laser module. So any 12V power supply laser module can be installled on this machine. But you need to connect the laser cable with the right polarity, the red is positive, otherwise the laser mdoule will burn down. Q:Can I extend the slide rail to expand its engraving area? A:Yes, you can. But you need to find the the slide rail by yourself, we do not provide such extended slide rail. Q:When I receive it, how to let it work? A:Fist of all, you need to plug the stepper moter power cable to the controller board, then installl the software and the driver, power supply the machine,that's all. Q:What format of the pictures can Benbox support? A: It can support jpg /png /bmp /dxf etc. Q: If the engraving result is bigger than we set in GRBL, what should we do? A: Please check the $0,$1 and $2, and set them to 80 (Eighty).

$439.9

In stock

Description: 4 Axis Stepper Motor Driver Board Controller Laser board For DIY Laser Engraver Specification: Brand EleksMaker Model IVAxis Interface USB Size 100mm*80mm Power Requirement higher than12V 2A Support Stepper Motor Motor within 2A 2-phase 4-wire Input Voltage 7.5V-12V (the voltage will affect the laser effect)) Power Interface DC5.5 - 2.1 (Inside is positive electrodes and ouside is negative electrodes) Feature: 1. Expansion of functions: Limit, subdivision, stop, hand control, the fan, low light, external relay 2. Fit for DIY desktop laser engraver,dispensing machines printer,plotter,tool CNC. 3. 4-axis linkage, Y-axis dual interface, can drive a stepper motor within 2A 2-phase 4-wire 4. MINI USB interfaces, 12V power supply, delivery lines. Send software. Technical support. 5. Large MOS tube,onboard DC buck module, wire jump ADJ can adjust manually the laser voltage to control the laser power Please try to use this software to run the device: https://www.dropbox.com/s/5717rf9qeikxr38/USBCNC-EN.zip?dl=0 About the Activation code,please send a screenshot to our customer service: [email protected] to get it. Thank you. (Every control board has different keys.) Note: Jumper inserted in ADJ, Regulate the voltage module can control the laser voltage 5V laser module group should wire into ADJ and regulate the output voltage of 5V or less to pick Laser Module The motor can not work hight than 2A, when the motor work for a long time in 1A to 2A please pay attention to heat Package included: 1X USB 4Axis Stepper Motor Driver Board 1X USB Cable 2X 2pDupont Lines 5X 4PDupont Lines Wiring instruction:

$30.99

In stock

Description: EleskMaker ManaSE 2 Axis Stepper Motor Driver Board Controller Laser board For DIY Laser Engraver Specifications: Brand EleskMaker Model ManaSE Interface USB Size 94*46mm Hole Size 85x36mm Support Axes XY axis Power Requirement Higher than12V 2A Support Stepper Motor Motor within 2A 2-phase 4-wire Input Voltage 12V Power Interface DC5.5 - 2.1 (Inside is positive electrodes and ouside is negative electrodes) Features: 1. Fit for DIY desktop laser engraver,dispensing machines printer,plotter 2. MINI USB interfaces, 12V power supply, delivery lines. Send software. 3. 2-axis linkageY-axis dual interface, can drive a stepper motor within 2A 2-phase 4-wire 4. Large MOS tube,onboard DC buck module, jumper ADJ can adjust manually the laser voltage to control the laser power Tips: The software we have upload it to the Mega Netdisk: The New updated software download link (2017.01): Click Here The laser machine benbox Instruction downloading link is: Click Here The laser machine benbox & GRBL software downloading link is: Click Here Note: There isn't Voltage Regulator Module in this Laser board The motor can not work hight than 2A, when the motor work for a long time in 1A to 2A please pay attention to heat Wiring instruction: The Updated one wiring picture: Package included: 1X USB 2 Axis Stepper Motor Driver Board 1X USB Cable 6X Dupont Lines (Now the EleskMaker ManaSE original board and the new one will send in random, but in the future, the new boards will replace the original ones, hope your kindly understanding, thank you:) ) More Details:

$26.98

In stock

Description: Flexible 39mm Black Ocular Soft Rubber Cover Eye Protector Scope Telescope Specification: Material: Soft rubber Product name: Rubber cover Color: Black Length: 10cm/3.93" Flat caliber: 3.9cm/1.53" Suitable for: Telescope sight Features: 1.Make of Rubber Material,When aiming more convenient and accurate, protect your eyes from injury. 2.Exterior light provide a much clearer sight view. Package Included: 1x Rubber cover More Details:

$3.99

In stock

Black Aluminum Heat Sink Heatsink for 12mm Laser Host Base Features: Anodized on the surface,Effective antioxidant Able to be installed on the laser gimbal directly For heat dissipation of laser module Sturdy and durable Specifications: Material: aluminium alloy Color: black Size:22*25*58mm Note :The package does not include the holder Package included: 1x Aluminum Heat Sink Heatsink

$2.98

In stock

Description: 1m 2GT-6mmMXL-6mm Bubber Opening Belt for Laser Engraving Machine Specification: Materail:Bubber Type:2GT-6MM MXL-6MM Width: 6mm Length:1m Pitch: 2GT: 2.0mm MXL: 2.032mm Package included: 1Opening Belt

$2.88

In stock

Eleks Mill Product Show: CNC Ink Stamp Making With the Eleks Mill: How to Make a Keyring with the Desktop Eleks Mill: How to assemble it? Click here Specification: Brand EleksMaker Axial Triaxial Machine Model EleksMill Dimensions 260 260 260mm Actual stroke 130 90 40mm Parts Packing size 580400 130mm Parts packaging quality 5.5kg Communication Interface MiniUSB Interface Dashboard choice EleksMaker X1 Stepper motor 1.3A 42 stepper motor Power choice 12V 5A above Software Support GRBL (CNC) Benbox (laser) Certification CE, FCC,FDA Features: 1.Make of Aluminum material,durable and solid,Adjustable focal length, to wood carving, you can use the NC and so on. 2.Main purpose: wooden plaque engraving, laser engraving, PCB sculpture, acrylic sculpture 3.Equipped with constant-current driver board ensure stable output optical power,low heat no external driver board needed,easy to use. Notes: Installation,Software download and Illustration link: Click here Package Included:(Need to be built up by yourself) Parts Name Quantity Aluminum Rod 5 Frame Board 18 Stepper Motor 3 Spindle Motor 1 Linear Bearing 12 Power Supply 1 Screw Box 1 Nylon Grip 1 Rubber Foot 4 Control Board 1 Shaft 8 Motor Wire 4 USB Line 1 Bobbin 1 Gift 1 Other works Figure: FDA Certificate:

$289.9

In stock

Description: Here are more videos to share you the experiments with the fantastic machine by our loyal customers, please as reference: CNC Ink Stamp Making With the Eleks Mill: How to Make a Keyring with the Desktop Eleks Mill: Cutting Wood Gears on CNC Eleks Mill: Specification: Brand EleksMaker Axial Triaxial Power 500mw Wave Length 445nm-450nm Machine Model EleksMill Dimensions 260 260 260mm Actual stroke 130 90 40mm Parts Packing size 580400 130mm Parts packaging quality 5.5kg Communication Interface MiniUSB Interface Dashboard choice EleksMaker X1 Stepper motor 1.3A 42 stepper motor Power choice 12V 5A above Software Support GRBL (CNC) Benbox (laser) Certification CE, FCC,FDA Features: 1.This product not only can be used as CNC Micro Engraving Machine, and with a 500mw Laser Module, can be used as a laser engraving machine. 2.Two functions can be switched with each other, allowing you to work even easier. 3.Make of Aluminum material,durable and solid,Adjustable focal length, to wood carving, you can use the NC and so on. 4.Main purpose: wooden plaque engraving, laser engraving, PCB sculpture, acrylic sculpture 5.Equipped with constant-current driver board ensure stable output optical power,low heat no external driver board needed,easy to use. Installation Notes: Here is an affficial link for you to get the instruction and the software of the EleksMill: CLICK HERE Package Included:(Not Include Goggles) Parts Name Quantity 500mw laser module 1 Aluminum Rod 5 Frame Board 18 Stepper Motor 3 Spindle Motor 1 Linear Bearing 12 Power Supply 1 Screw Box 1 Nylon Grip 1 Rubber Foot 4 Control Board 1 Shaft 8 Motor Wire 4 USB Line 1 Bobbin 1 Gift 1 More Details: Tip: The old DIY CNC Micro engraving machine material is mainly the Aosong board, now the new material is white acrylic board. Other works Figure: FDA Certificate:

$329.9

In stock

850mm Stepper Motor Wire for Motor of Laser Engraving Machine Specification: Pin:4P Length:850mm Use for the stepper motors that are most frequently used on Laser Engraving Machine . Package included: 1 stepper motor wire

$1.89

In stock

Here is a link for you to look for a series of Laser Engraving Machine : Please Click me:) Description: 200nm-2000nm Laser Protection Goggles Glasses IPL-2 OD+4D For Laser The laser machine can prevent or reduce the damage of laser to the human eye, is a kind of efficient safety goggles, applicable to a variety of lasers Specifications: Model: IPL-2 Lens material: PC Protection wavelength: 200-2000NM Density: > 5.0, (OD +4) Visible light transmittance: 70% Wavelength: 650 nm Size:150x115mm Protection features: absorption all directional protection Suitable for laser: infrared laser /YAG laser / diode laser / laser beauty equipment Package included: 1x Protection Goggles 1x Box 1x Glasses cloth (color at ramdon) More Details

$7.9

In stock

Description: 40W Power Supply Mini CO2 Laser Rubber Stamp Engraver Cutter 110/220V Specifications: SIze 16.5x14x7.5cm AC input voltage AC220V / 110V DC input voltage DC300V / 150V AC input frequency 47 ~ 440Hz Maximum output voltage 30KV Voltage Output 1 24V 1A Voltage Output 2 5V 1A Power 40W Efficiency 91% Current protection 130% of the maximum current Construction cooling fan High voltage control 3V Low control voltage 0.6V Working temperature -30 ~ + 60 Insulation resistance 50M (DC500V) Earth leakage current 1mA (AC220V) 0.5 mA (AC110V) Vibration resistance Amplitude 0.5mm Frequency 10 ~ 55Hz3 dimensional directions for two hours Features: - Power supply with zero-current soft-switching half-bridge circuit, the power supply with high efficiency, fast response - Port Control simple to adapt to high and low two signals - Power supply has open circuit protection Packing Included: 1 x power supply

$59.99

In stock

Specifications: Shell Material: Iron+ Aluminium Alloy Laser Head: Blue and Purple Light (Violet) Size: 213 x 140 x 140mm Package Size: 260 x 185 x185mm Carving Area: 38 x38mm USB Data Cable: 1M Power Cable: 1M Net Weight: 1.5kg Notice: 1. This is a desktop laser carving machine for home use, ca not be compared with the machine for industrial use. 2. Do not point the laser head at human or livestock, do not use it to illuminate, the machine needs rest after running for around 20 minutes. 3. Laser has power, body exposure to it is dangerous. 4. Limited kinds of objects can be carved, such as wooden objects, organic glass, corian, paper, double color board, leather, resin, metal spray etc. 5. It should not be stooped while running, or else it wear damage. 6. Not suitable for kids under 14. 7. Only support windows system. 8. It is Acrylic product, do not throw it, or else it might rupture. 9. The making of its shell employed lasser cutting technology, its corner is sharp, please be cautious while placing it, for fear of leaving scratches. Solution for possible problems: 1. Machine doesn't operate Disconnect power cord and date line, reconnect to computer, finally ,open upper monitor and connect again. 2. Laser focusing Rotate laser head focusing cao, so the spot will gather to make a small focusing point on the object surface. 3. No print on the object surface Make sure the carved objects are incombustible metal or ceramics, them make sure if laser is correctly focused or if the time of burning is set appropriate. 4. Offline carving If needs offline carving, please re-sart it after completing installation. Function button is only available under offline status, online status needs to be controlled by upper monitor. Packing List: 1 x Carving machine 1 x 1000mW modulated laser head 1 x Power cable 1 x USB Data Cable 1 x Goggle 1 x 2.0 U- Disk(Software) 1 x CD 2 x Small Wood Board 3 x Paper 1 x Screwdriver(with 2 screws) 1 x User's Manual More Details:

$79.99

In stock

Description: Non-Contact Laser LCD Display Digital IR Infrared Thermometer Temperature Meter Specifications: Material: ABS Plastic Temperature range : -50 - 350 (-58 - 662) Accuracy : 1.5% or 1.5 Resolution : 1% or 1 Distance Spot Ratio: 12 : 1 Emissivity : 0.95 preset Resolution : 0.1 / 0.1F Response Time: 500ms Response wavelength: 8 ~ 14um Red Laser Power : less than 0.5 MW Working environment: 0 ~ 40 10 ~ 80% RH Storage environment: -20 ~ 60 10 ~ 70% RH Display: four digit LCD display, the largest display 1999 LCD size: 22 22mm Power supply : 2 x 1.5V AAA battery (Not included.) Product Dimension : 8038150mm (L x W x H) Features: 1. Data Hold function. 2. Laser Target Pointer ON / OFF selection. 3. Backlight ON / OFF selection. 4. Auto Power Shut Off in 7 seconds without any operation. 5. Results in less than 500ms, / conversion. 6. Consist of optics, temperature sensor, signal amplifier, processing circuit and LCD display. 7. Laser on/ off switch, Auto power off & temperature data hold. 8. Mini design, compact and lightweight, easy to carry 9. Precise non-contact IR thermometer, safe and easy to use. 10. It's suitable for hot water pipes, hot engine parts, cooking surfaces, hot tubes insulation, electrical connection, ballasts in electric lights, electric motors, bearings, wine coolers hot asphalt, swimming pools, fish tanks, hot & cold food products, heating air conditioning, etc. Note: #1 refers to (-50 - 350 ); and #2 refers to (-50 - 500 ). Please pay attention when you order:) Package included: 1x Infrared Thermometer More Details:

$12.8

In stock

Description: 40m/131ft Portable Laser Distance Meter Handheld Range Finder Measuring AU Tool Specifications: Distance measurement precision 2mm Measurement unit options Min/in/ft Single/Continuous measurement function YES Outdoor target reflection NO Area measurement function YES Volume measurement function YES Pythagorean proposition measurement function Full Mode Add and subtract measurement function YES Min/Max value YES Data store/ recall function YES Max storage 40m-99 units Automatic backlight YES Protection Classification IP54 Buttons/Keys sound YES Laser level II Laser type 635nm, <1mW Cut off the laser automatically 20s Auto Power -Off 150s Maximum Battery Life 4000 times Storage temperature -20~60C / -4~140F Working temperature 0~40C / 32~104F Storage humidity RH 85% Battery 1.5V 2 x AAA batteries (NOT Included) Product size Approx. 30x55x125mm Color Black and Green Features: - Mini & portable - High accuracy and wide measuring range up to 40m - Quick measurement of distance, area and volume with one button operation. - Automatic calculation of area and volume. - Indirect measurement by Pythagorean theorem. - Min/Max distance tracking (display value). - Easy addition/subtraction of measurement. - Set up front / rear benchmark. - Switchable among metre (m) inch (in),feet (ft). - Easy targeting with bright laser pointer. - Large LCD with backlight. - Display illumination and multi-line display(4 lines). - 99 data records and recall function. - Bubble level equipped as a spirit level tool. - Auto correction and error report technology. - Low battery indication. - Automatic / manual power off function. - IP54 protection (dust & splash proof). - Compact and handheld design, portable and convenient. - Widely used in construction and industries, especially in large areas such as rooms, apartments, buildings, real estates, factories, Note: There will be a bit of greater differences of measurement results in harsh environment, such as strong sunlight, excessive temperature fluctuations, weak reflective surface,low battery. As to this,target reflection board as auxiliary will assist you to get a better result. Package Included: 1 x Laser Distance Meter 1 x Portable pouch 1 x Hanging rope 1 x User Manual More Details:

$33.9

In stock

Description: 2Pcs 12*30mm Metal Housing Host with 200nm-1100nm Lens for 5.6mm TO-18 Laser Diode Specification: Color: Gold Material: Metal Size: 12 x 30mm/0.5'' x 1.2'' Feature: 1.Diode housing for 5.6mm TO-18 laser diode. 2.Suitable diameter: 12X30 mm.With spring. 3.This housing is with uncoated laser lens, it is can be widely used for full-wavelength lasers from 200-1100nm lasers. 4.It can help the diode contact the housing more tightly. Package Include: 2 x Metal Housing Case Notice: The color may have different as the difference display,pls understand.

$4.56

In stock

Description: 500mw Bluish Violet Laser Head Parts 405nm For DIY Engraving Machine Specification: Input voltage: 4.5-5V Color: blue-violet light Power: 500mw Wave length: 405nm Features: 1.Can be carved items included: 2.Hard wood, plastic, bamboo, rubber, leather, cut paper and so on. 3.Can NOT engrave Metal/Aluminum/Acrylic and any Retardant Material Package include: 1x Laser head Note: This laser module is used for the NEJE machine. If not, the power be will less than 500mW. Please make sure you do not mind before you bid. Thank you.

$19.07

In stock

Description: 300mw Bluish Violet Laser Head Parts 405nm For Engraver DIY Engraving Machine Specification: Input voltage: 4.5-5V Color: blue-violet light Power: 300mw Wave length: 405nm Applications: 1.Can be carved Hard wood, plastic, bamboo, rubber, leather, cut paper and so on. 2.Can NOT engrave Metal/Aluminum/Acrylic and any Retardant Material Package include: 1x Laser head

$20.36

In stock

31 - 60 of 101 items